General Description
The MAX2611 is a low-voltage, low-noise amplifier for use from DC to microwave frequencies. Operating from a single +5V supply, it has a 3dB bandwidth of 1100MHz. The MAX2611’s low noise figure and high drive capability make it ideal for a variety of transmit, receive, and buffer applications.
In a typical application, the only external components needed are input and output blocking capacitors and a VCC series resistor. To improve gain and output power, an RF choke can be added in series to the bias resistor.
The MAX2611 comes in a 4-pin SOT143 package, requiring minimal board space.

Features
♦ Single +5V Supply Operation
♦ 3dB Bandwidth: DC to 1100MHz
♦ High Gain: 18dB at 500MHz
♦ Low Noise Figure: 3.5dB at 500MHz
♦ High Drive Capability: +3dBm at 16mA ID
♦ Ultra-Small SOT143 Package

Applications
   Satellite Receivers
   TV Tuners
   Wireless Local Loops
   ISM Radios
   Global Positioning Systems
   Wireless Local-Area Networks
   Land Mobile Radios
   Set-Top Boxes