CEC1702 EFUSE GENERATOR TOOL

USER’S GUIDE

 2017 Microchip Technology Inc.

DS50002598A-page 4

Preface

INTRODUCTION

This chapter contains general information that will be useful to know before using the

CEC1702 Efuse Generator Tool User’s Guide. Items discussed in this chapter include:

• Document Layout

• Conventions Used in this Guide

• The Microchip Web Site

• Development Systems Customer Change Notification Service

• Customer Support

• Document Revision History

DOCUMENT LAYOUT

This document describes how to use the CEC1702 Efuse Generator Tool User’s Guide

as a development tool for CEC1702 Efuse Programming. The manual layout is as

follows:

• Chapter 1. “Introduction” – This chapter provides information on programming

the Efuse using the CEC1702 Efuse Generator Tool.

• Chapter 2. “CEC1702 Efuse Generator Tool Procedure” – This chapter con-

tains a step by step procedure.

• Appendix A. “CEC1702 Clicker Board Schematic” – This appendix contains

schematic diagram of the CEC1702 Clicker board.

• Appendix B. “Programming Steps For MikroE Tool” – This section explains

steps to program the Efuse using mikroProg Suite for ARM.

• Appendix C. “References” – This appendix includes helpful references.

NOTICE TO CUSTOMERS

All documentation becomes dated, and this manual is no exception. Microchip tools and

documentation are constantly evolving to meet customer needs, so some actual dialogs

and/or tool descriptions may differ from those in this document. Please refer to our web site

(www.microchip.com) to obtain the latest documentation available.

Documents are identified with a “DS” number. This number is located on the bottom of each

page, in front of the page number. The numbering convention for the DS number is

“DSXXXXXA”, where “XXXXX” is the document number and “A” is the revision level of the

document.

Select the Help menu, and then Topics to open a list of available online help files.