DocID030747 Rev 1

21/32

STWBC-EP

Electrical characteristics

32

Table 10. Current DC characteristics

Symbol

Description

Min.

Typ.

Unit

-

-

1.5

mA

Standard output low level current at 5 V and VOL2(2)

--

3

--

5

High sink output low level current at 5 V and VOL3(3)

-

-

7.75

Standard output high level current at 3.3 V and VOH1(2)

-

-

1.5

Standard output high level current at 5 V and VOLH2(2)

--

3

High sink output high level current at 3.3 V and VOH3(3)

--

5

High sink output high level current at 5 V and VOH3(3)

-

-

7.75

-

-

± 1

μA

-

-

± 4

mA

Total injection current (sum of all I/O and control pins)(5)

-

-

± 20

1. Data based on characterization result, not tested in production.

2. Parameter applicable to signals: PWM_QFOD, DNBL, LED, QC_IO, DCDC_DRV, DCDC_DAC, UPBL, UART_TX.

3. Parameter applicable to the signals: SWIM, DEMAGNET.

4. Applicable to any digital inputs.

5. The maximum value must never be exceeded.

6. The negative injection current on the TANK_VOLTAGE, VTARGET, QFOD_ADC, COIL_TEMP, ISENSE, VMAIN pins have

to be avoided since it affects ADC conversion accuracy.