CP10.241-R1, CP10.241-R2,

CP10.241-R3,CP10.242-R2

CP-Series

Feb. 2018 / CP10.241-R2 Rev0.3-EN - All values are typical figures specified at 230Vac, 50Hz input voltage, 24V, 10A output

load, 25°C ambient and after a 5 minutes run-in time unless otherwise noted.

www.pulspower.com Phone +49 89 9278 0

Germany

7/31

P R E L I M I N A R Y

An active inrush limitation circuit (NTCs, which are bypassed by a relay contact) limits the input inrush current after

turn-on of the input voltage.

The charging current into EMI suppression capacitors is disregarded in the first microseconds after switch-on.

AC 100V

AC 120V

AC 230V

Inrush current

Max.

At 40°C, cold start

Typ.

At 25°C, cold start

Typ.

At 40°C, cold start

Inrush energy

Max.

0.1A²s

0.1A²s

0.4A²s

At 40°C, cold start

Fig. 5-1 Typical turn-on behaviour at nominal

load, 120Vac input and 25°C ambient

Fig. 5-2 Typical turn-on behaviour at nominal

load, 230Vac input and 25°C ambient

50ms/DIV

Input current

2A/DIV

Input voltage

250V/DIV

6A

50ms/DIV

Input current

2A/DIV

Input voltage

500V/DIV

Output voltage 20V/DIV

Output voltage 20V/DIV

6A