BNS-OD-FC002/A4

Specific lighting

LTPL-P033RGB

LED

LED

Circuit model A

Circuit model B

(A) Recommended circuit.

(B) The brightness of each LED might appear different due to the differences in the I-V characteristics

of those LEDs.

ESD (Electrostatic Discharge)

Static Electricity or power surge will damage the LED. Suggestions to prevent ESD damage:

Use a conductive wrist band or anti-electrostatic glove when handling these LEDs.

All devices, equipment, and machinery must be properly grounded.

Work tables, storage racks, etc. should be properly grounded.

Use ion blower to neutralize the static charge which might have built up on surface of the LED’s

plastic lens as a result of friction between LEDs during storage and handling.

ESD-damaged LEDs will exhibit abnormal characteristics such as high reverse leakage current, low

product.

Suggested Checking List

Static-Safe Workstation & Work Areas

1.

Static-safe working stations or work-areas have ESD signs.

2.

All surfaces and objects at all static-safe workstation and within 1 ft measure less than 100V.

3.

All ionizer activated, positioned towards the units.

4.

Each work surface mats grounding is good.