PLC Accessories

Description

Type

Order No.

Pcs./ Pkt.

Input terminal block, for

the input of up to four potentials,

for mounting on

3

Technical data

Connection cross section:

AWG 24-10

Max. current

32 A

Max voltage

Terminal block dim.:

same shape as

PLC standard series,

terminal block width 9 mm

Color

gray

PLC-ESK GY

29 66 50 8

5

(L1, L2, L3) between identical

terminal blocks of adjacent modules,

the PLC-ATP separating plate should

be installed

Cont. plug-in bridge,

500 mm long, insulated,

red

can be cut to any length, for

blue

power distribution with PLC...

gray

FBST 500-PLC RD

29 66 78 6

20

FBST 500-PLC BU

29 66 69 2

20

FBST 500-PLC GY

29 66 83 8

20

Plug-in bridge, 2-pos.,

6 mm long, insulated, for

red

power distribution with PLC

blue

gray

FBST 6-PLC RD

29 66 23 6

50

FBST 6-PLC BU

29 66 81 2

50

FBST 6-PLC GY

29 66 82 5

50

Separating plate, 2 mm thick, should be installed

at the start and end of a PLC terminal strip.

Furthermore, it is used for:

– visual separation of groups,

– protective separation of different

voltages of neighboring

PLC interfaces in acc. with DIN VDE 0106-101,

– separation of neighboring bridges

with different potentials,

– separation of PLC interfaces with

voltages > 250 V

Color: black

PLC-ATP BK

29 66 84 1

25

Headquarters: © Phoenix Contact GmbH & Co. KG • Flachsmarktstraße 8-28 • 32825 Blomberg • Germany

Phone +49-(0) 52 35-3-00 • Fax +49-(0) 52 35-3-4 12 00 • http://www.phoenixcontact.com

PHOENIX CONTACT page 13 of 14

Input terminal block PLC-ESK

The 9 mm wide input terminal block PLC-ESK is the

same shape as the PLC interface terminal blocks. It is

used to feed in bridging potentials. Its nominal current is

32 A! When currents are

≤ 6 A, they can be fed in

directly at the connecting terminal blocks of one of the

connected PLC interfaces.

Plug-in bridges FBST

The differently colored, insulated plug-in bridges

FBST make optimum use of the advantages of PLC

interfaces. The 2-position single plug-in bridges FBST 6

are especially suited for bridging a smaller number of

modules and residual currents

≤ 6 A. When a circuit is

supplied from both sides, they offer the advantage that

the circuit can be opened at any point, allowing all the

other modules to continue to be supplied at the same

time.

The 500 mm continuous plug-in bridge FBST 500 is

even more convenient. All bridges are equipped with a

groove which allows them to be removed with a

screwdriver.

If bridges with different potentials meet in neighboring

functional blocks, the separating plate PLC-ATP should

be placed between them.

Separating plate PLC-ATP

The PLC-ATP separating plate must always be

installed at the beginning and end of a terminal strip.

In addition to pure visual separation of functional

blocks, it is also necessary in certain cases to place the

separating plate between adjacent PLC interface

terminal blocks, e.g. when 3 phases (L1, L2, L3) are

used on the contact side of the PLC relay terminal

blocks.

PLC-ATP is equipped with prescored break-out points

at the bridging positions, so that individual bridges can

pass through if necessary.