MP5092

Dual 5.5V, 7.5A Programmable Current

with Output Discharge Function

MP5092 Rev. 1.0

www.MonolithicPower.com

1

1/8/2015

MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.

© 2015 MPS. All Rights Reserved.

The Future of Analog IC Technology

DESCRIPTION

The MP5092 integrated a dual load switches to

provide load protection covering 0.5V to 5.5V

voltage range. Any one channel can work alone.

Each channel can provide 7.5A load capability.

provides very high efficient and space saving

solution in notebook and tablet or other portable

devices applications.

With the soft start function, the MP5092 can

avoid inrush current during circuit start up.

MP5092 also provides different functions, like

programmable soft start time, output discharge

functions, OCP and thermal shutdown features.

The max load at the output (source) is current

limited. This is accomplished by utilizing a

sense FET topology. The magnitude of the

current limit is controlled by an external resistor

from ILIM pin to ground.

Tiny 18 pins QFN 2mmx3mm of MP5092 is

available in space saving package.

FEATURES

• Integrated 10mΩ Low RDSON FETs

• Adjustable Start Up Slew Rate

• Wide VIN Range from 0.5V to 5.5V

• <1uA Shutdown Current

• Programmable 7.5A Current Limit Range

• Output Discharge Function

• Enable Pin

• <200ns Short-Circuitry Response Protection

• Thermal Protection

• Small QFN-18 (2mmx3mm) Package for

Space Saving

APPLICATIONS

• Notebook and Tablet Computers

• Portable Devices

• Solid State Drivers

• Handheld Devices

All MPS parts are lead-free and adhere to the RoHS directive. For MPS green

status, please visit MPS website under Products, Quality Assurance page.

“MPS” and “The Future of Analog IC Technology” are registered trademarks of

Monolithic Power Systems, Inc.

TYPICAL APPLICATION