MP5092 – DUAL 5.5V, 7.5A LOW RDSON LOAD SWITCH WITH OUTPUT DISCHARGE FUNCTION

MP5092 Rev. 1.0

www.MonolithicPower.com

10

1/8/2015

MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.

© 2015 MPS. All Rights Reserved.

PIN FUNCTIONS

(2x3)QFN18

Pin #

Name

Description

1, 13

VIN1

Input Power Supply of Switch 1.

2, 12

VOUT1

Output to the Load of Switch 1.

3, 11

VOUT2

Output to the Load of Switch 2.

4, 10

VIN2

Input Power Supply of Switch 2.

5

EN2

Enable Input of Switch 2. Pulling this pin below the specified threshold shuts the

chip down.

6, 15

GND

Ground.

7

VCC2

Switch 2’s Supply Voltage to the Control Circuitry.

8

ILIM2

Output Current Limit Configure of Switch 2. Place a resistor to ground to set the

overload current limit level.

9

SS2

Soft start control pin of load Switch 2. Connecting a capacitor from this pin to

ground to set the soft start time.

14

EN1

Enable Input of Switch 1. Pulling this pin below the specified threshold shuts the

chip down.

16

VCC1

Switch 1’s Supply Voltage to the Control Circuitry.

17

ILIM1

Output Current Limit Configure of Switch 1. Place a resistor to ground to set the

overload current limit level.

18

SS1

Soft Start Control Pin of Load Switch 1. Connecting a capacitor from this pin to

ground to set the soft start time.