AS39513 datasheet(88/108 Pages) AMSCO

88 / 108 page

Page 88

ams Datasheet

Document Feedback

[v1-10] 2018-Apr-25

AS39513 − Detailed Description

Get Log Status Command

Get Log Status Command Request:

Get Log Status Command Reply:

The get log status command returns the current value of the

status bits, in the format shown below,

Status Bits Format

where:

OVLIM – Limit count threshold exceeded.

0 = No limit count thresholds exceeded.

1 = One of the eight limit count thresholds have been exceeded.

ACTPOR – Active wakeup after power-up reset.

0 = The AS39513 has not had a reset direct to ACTIVE mode

event.

1 = The AS39513 has had a power on reset occur when WAKEMD

= 1 and ACTIVE = 1.

LOWBAT – Low battery condition.

0 = No low battery condition measured.

1 = The battery check operation (BATCHK = 1) resulted in a low

battery indication.

ADCERR – ADC error flag.

0 = No ADC error has occurred.

1 = An ADC error has occurred, either from an input signal out

of range or a poorly chosen combination of reference voltage

settings.

OVWRT – Measurement overwrite flag.

0 = No measurements have been overwritten.

1 = At least one measurement has been overwritten.

SOF

Flags

Command

IC Mfg.

UID

CRC

EOF

NFLAGS

0xAA

0x36

64 bits

16 bits

SOF

Flags

Log Stat

CRC

EOF

RFLAGS

8 bits

16 bits

Bit

Log Stat

ACTIVE

EEFULL

OVWRT

ADCERR

LOWBAT

ACTPOR

OVLIM

AS39513 数据表(PDF) 88 Page - ams AG

AS39513 数据表(HTML) 88 Page - ams AG

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载