数据搜索系统,热门电子元器件搜索
  Chinese  ▼
ALLDATASHEETCN.COM

X  

LRTB-R98G 数据表(PDF) 25 Page - OSRAM GmbH

部件名 LRTB-R98G
功能描述  black SMT package, higher contrast by a black surface (RGB-Displays) and diffused resin
PDF  25 Pages
Scroll/Zoom Zoom In 100%  Zoom Out
制造商  OSRAM [OSRAM GmbH]
网页  http://www.osram.com
标志 OSRAM - OSRAM GmbH

LRTB-R98G 数据表(HTML) 25 Page - OSRAM GmbH

Back Button LRTB-R98G Datasheet HTML 17Page - OSRAM GmbH LRTB-R98G Datasheet HTML 18Page - OSRAM GmbH LRTB-R98G Datasheet HTML 19Page - OSRAM GmbH LRTB-R98G Datasheet HTML 20Page - OSRAM GmbH LRTB-R98G Datasheet HTML 21Page - OSRAM GmbH LRTB-R98G Datasheet HTML 22Page - OSRAM GmbH LRTB-R98G Datasheet HTML 23Page - OSRAM GmbH LRTB-R98G Datasheet HTML 24Page - OSRAM GmbH LRTB-R98G Datasheet HTML 25Page - OSRAM GmbH  
Zoom Inzoom in Zoom Outzoom out
 25 / 25 page
background image
LRTB R98G
2018-03-19
25
Fußnoten:
1)
Helligkeitswerte
werden
mit
einer
Stromeinprägedauer
von
25 ms
und
einer
Genauigkeit von
 11% ermittelt.
2)
Die LED kann kurzzeitig in Sperrichtung betrieben werden.
3)
R
thJA
ergibt sich bei Montage auf PC-Board FR 4
(Padgröße
 16 mm2 je Pad)
4)
Wellenlängen werden mit einer Stromeinprägedauer
von 25 ms und einer Genauigkeit von ±1 nm ermittelt.
5)
Spannungswerte
werden
mit
einer
Stromeinprägedauer von 1 ms und einer Genauigkeit
von ±0,1 V ermittelt.
6)
Wegen der besonderen Prozessbedingungen bei der
Herstellung von LED können typische oder abgeleitete
technische Parameter nur aufgrund statistischer Werte
wiedergegeben
werden.
Diese
stimmen
nicht
notwendigerweise
mit
den
Werten
jedes
einzelnen
Produktes überein, dessen Werte sich von typischen und
abgeleiteten
Werten
oder
typischen
Kennlinien
unterscheiden können. Falls erforderlich, z.B. aufgrund
technischer Verbesserungen, werden diese typischen
Werte ohne weitere Ankündigung geändert.
7)
Im gestrichelten Bereich der Kennlinien muss mit erhöhten
Helligkeitsunterschieden
zwischen
Leuchtdioden
innerhalb einer Verpackungseinheit gerechnet werden.
Dimmverhältnis im Gleichstrom-Betrieb max. 5:1 für
amber
8)
Maße werden wie folgt angegeben: mm (inch)
9)
Gehäuse hält TTW-Löthitze aus nach CECC 00802. Das
Gehäuse ist auf Grund der Beinchengeometrie nicht für
TTW-Löten empfohlen, da sich Lötbrücken bilden können.
10) Ein
kritisches
Bauteil
ist
ein
Bauteil,
das
in
lebenserhaltenden Apparaten oder Systemen eingesetzt
wird
und
dessen
Defekt
voraussichtlich
zu
einer
Fehlfunktion dieses lebenserhaltenden Apparates oder
Systems führen wird oder die Sicherheit oder Effektivität
dieses Apparates oder Systems beeinträchtigt.
11) Lebenserhaltende Apparate oder Systeme sind für
(a) die Implantierung in den menschlichen Körper
oder
(b) für die Lebenserhaltung bestimmt.
Falls sie versagen, kann davon ausgegangen werden,
dass die Gesundheit und das Leben des Patienten in
Gefahr ist.
Published by
OSRAM Opto Semiconductors GmbH
Leibnizstraße 4, D-93055 Regensburg
www.osram-os.com
© All Rights Reserved.
Remarks:
1)
Brightness groups are tested at a current pulse
duration of 25 ms and a tolerance of
 11%.
2)
Driving the LED in reverse direction is suitable for short
term application.
3)
R
thJA
results
from
mounting
on
PC
board
FR 4
(pad size
 16 mm2 per pad)
4)
Wavelengths are tested at a current pulse duration of
25 ms and a tolerance of ±1 nm.
5)
Forward voltages are tested at a current pulse
duration of 1 ms and a tolerance of ±0.1 V.
6)
Due to the special conditions of the manufacturing
processes of LED, the typical data or calculated
correlations of technical parameters can only reflect
statistical figures. These do not necessarily correspond to
the actual parameters of each single product, which could
differ from the typical data and calculated correlations or
the typical characteristic line. If requested, e.g. because of
technical improvements, these typ. data will be changed
without any further notice.
7)
In the range where the line of the graph is broken, you
must expect higher brightness differences between single
LEDs within one packing unit.
Dimming range for direct current mode max. 5:1 for amber
8)
Dimensions are specified as follows: mm (inch)
9)
Package able to withstand TTW-soldering heat acc. to
CECC 00802.
The package is not recommended for TTW soldering
because a short cut between the contacts can occure.
10) A critical component is a component used in a life-support
device or system whose failure can reasonably be
expected to cause the failure of that life-support device or
system, or to affect its safety or the effectiveness of that
device or system.
11) Life support devices or systems are intended
(a) to be implanted in the human body,
or
(b) to support and/or maintain and sustain human life. If
they fail, it is reasonable to assume that the health
and the
life of the user may be endangered.



Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25


数据表 下载

Go To PDF Page


链接网址



ALLDATASHEET是否为您带来帮助?  [ DONATE ] 

关于 Alldatasheet   |   广告服务   |   联系我们   |   隐私政策   |   数据表链接    |   链接交换   |   制造商名单
All Rights Reserved©Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com