E32-R16 datasheet(108/108 Pages) OMRON

108 / 108 page

E32

SPECIAL HANDLING

E32-D51/-T51 Heat-Resistant Fiber

The bending radius of the fibers should be 35 mm min.

Connecting fibers via the E39-F10 Fiber Connector is not

possible.

The withstand temperature of the Heat-Resistant Fibers is 150°C

max. In continuous operation, the ambient temperature should be

130°Cmax.

E32-T14/-T51

If the sensor is ON because some object in front of the lenses

reflects light, attach the black seals (sold together) to the lenses.

E32-T14/-G14

Seal

E32-L25 (A) Wafer Sensor

Insert the fiber with a white line into the light projection side of the

Amplifier.

The tightening force of the sensor head is 8 kgf S cm (0.75 N S m).

Avoid places where water could be sprayed onto the E32-L25(A).

E32-T16 Slit Seal (Attachment)

Peel the E32-T16 Slit Seal off the ground paper and affix the Slit

Seal to the sensing face of the sensor so that the corners of the

Slit Seal fit in with the corners of the sensing face. To sense an

object at a distance of 30 cm max., a 0.5-mm wide Slit Seal must

be used.

E32-T16 Sensing Head

Attachment slit

Cat. No. CEDSAX4

11/01

Specifications subject to change without notice.

Printed in U.S.A.

OMRON ELECTRONICS LLC

One East Commerce Drive

Schaumburg, IL 60173

NOTE: DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters to inches divide by 25.4.

1-800-55-OMRON

OMRON CANADA, INC.

885 Milner Avenue

Scarborough, Ontario M1B 5V8

416-286-6465

OMRON ON--LINE

Global -- http://www.omron.com

USA -- http://www.omron.com/oei

Canada -- http://www.omron.com/oci

E32-R16 数据表(PDF) 108 Page - Omron Electronics LLC

E32-R16 数据表(HTML) 108 Page - Omron Electronics LLC

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载