V680 Series

12

Square Antenna with Built-in Amplifier

Note: For details, refer to the User’s Manual (Cat. No. Z248 or Z262).

Amplifier Unit

Note: For details, refer to the User’s Manual (Cat. No. Z248 or Z262).

*1. When connected to the V680-HS@@-R or V680-HS52-R.

*2. When connected to the V680-HS@@-W or V680-HS52-W. (Not including

the Connector on the Controller.)

ID Controller

Note: For details, refer to the User's Manual (Cat. No. Z249).

USB Port

The USB port is used for a simple connection with a personal computer using a USB cable. The port complies with USB 1.1, and the USB cable

uses a series A or series mini-B connector. A USB port driver must be separately provided. Consult with your OMRON representative for details.

When connected to a host device via USB, the communications will use 1:1 protocol regardless of the setting of DIP switches 3 to 9.

The USB port is not used for control purposes. When building a system, be sure to provide an RS-232C port or RS-422/RS-485C port.

Item

Model

V680-H01-V2

Ambient

operating

temperature

−10°C to 55°C (with no icing)

Ambient storage

temperature

−35°C to 65°C (with no icing)

Ambient

operating

humidity

35% to 85% (with no condensation)

Insulation

resistance

20 M

Ω min. (at 100 VDC) between connector

terminals and the rear plate

Dielectric

strength

1,000 VAC, 50/60 Hz for 1 min between

connector terminals and the rear plate

Degree of protection

IP63.(IEC60529); Mounting direction:

Communications surface facing up

Vibration resistance

10 to 150 Hz, 0.35-mm single amplitude,

axis directions (up/down, left/right, and

forward/backward) for 8 minutes each

Shock resistance

(Total: 18 times)

Appearance

200 × 250 × 40 mm

Material

Polycarbonate (PC) resin, ASA resin / Rear

Panel: Aluminum

Weight

Approx. 900 g

Cable length

0.5 m (use a relay cable to connect to the

Controller up to 30.5 m)

Item

Model

V680-HA63A

V680-HA63B

Ambient

operating

temperature

−10°C to 55°C (with no icing)

Ambient storage

temperature

−25°C to 65°C (with no icing)

Ambient

operating

humidity

35% to 85% (with no condensation)

Insulation

resistance

20 M

Ω min. (at 500 VDC) between the cable

terminals and the case

Dielectric

strength

1,000 VAC (50/60 Hz) for 1 minute between the cable

terminals and the case with a current leakage of 5 mA max.

Degree of protection

IP40 (IEC60529)

*1

IP67/IP65 (IEC60529)

*2

Vibration resistance

10 to 500 Hz variable vibration, 1.5-mm double

in X, Y, and Z directions for 11 minutes each

Shock resistance

(18 times in total)

Appearance

25 × 40 × 65mm (not including projections)

Material

Polycarbonate (PC) resin

Weight

Approx. 650 g (with 10-m cable)

Cable length

5 m, 10 m

Transmittable RF Tags

1-kbyte memory

2-, 8-kbyte memory

Item

Model

V680-CA5D01-V2

V680-CA5D02-V2

Power supply voltage

(Power consumption)

24 VDC (

−15% to +10%)

15 W max., 0.8 A max.

Communications Specifications

RS-232C, RS-422, RS-485

Input Specifications (Input voltage)

RST, TRG1, and TRG2

24 VDC (+10% to

−15%, including ripple) (PNP and NPN compatible)

Output Specifications (Maximum switching

capacity)

RUN, BUSY/OUT3, ERROR/OUT4, OUT1,

and OUT2

24 VDC (+10% to

−15%, including ripple)

PNP and NPN compatible

Ambient operating temperature

−10 to 55°C (with no icing)

Ambient storage temperature

−25 to 65°C (with no icing)

Ambient operating humidity

25% to 85% (with no condensation)

Insulation resistance

20 M

Ω min. (at 500 VDC) applied as follows:

(1) Between power supply terminals and grounded case

(2) Between ground and terminals

Dielectric strength

1,000 VAC (50/60 Hz) for 1 minute

(1) Between power supply terminals and grounded case

(2) Between ground and terminals

Degree of protection

Panel mounted (equivalent to IP20)

Vibration resistance

sweeps in X, Y, and Z directions for 8 minutes each

Shock resistance

Appearance

105 × 90 × 65 mm (not including projections)

Material

Polycarbonate (PC) resin, ABS resin

Weight

Approx. 300 g

Connectable Amplifier Units

12