V680 Series

14

Amplifier-integrated Controller (DeviceNet ID Slave/PROFIBUS ID Slave)

Note: 1. For details, refer to the User's Manual (Cat. No. Z278).

2. The number of words allocated in the master depends on the Access Mode.

Amplifier-integrated Controllers (ID Flag Sensors)

Note: 1. For details, refer to the User’s Manual (Cat. No. Z279).

2. The connectors are not water resistant. If there is a possibility that water will be splashed onto the ID Sensor Unit, mount it inside of a

control box. Also, be sure to use the V680 as a set with the V680-A60 Interface Cable (sold separately).

Item

Model

V680-HAM42-DRT

V680-HAM42-PRT

Network compatibility

DeviceNet

PROFIBUS DP-V0

Connectable Antennas

One channel (V680-HS

@@)

Rated voltage

24 VDC (

−15% to 10%) including 10% ripple (p-p)

Power consumption

4 W max. (Current consumption of 200 mA max. at power supply voltage of 24 VDC)

Ambient operating

temperature

−10 to 55°C (with no icing)

Ambient storage

temperature

−25 to 65°C (with no icing)

Ambient operating

humidity

25% to 85% (with no condensation; ambient operating temperature is 40°C max. at humidity of 85%)

Insulation resistance

20 M

Ω min. (at 500 VDC) between all terminals excluding the ground terminal and the case

Dielectric strength

1,000 VAC (50/60 Hz) for 1 minute between all terminals excluding the ground terminal and the case

Vibration resistance

each

Shock resistance

Appearance

65 × 65 × 65 mm (excluding protrusions)

Degree of protection

IEC 60529, IP20

Materials

Polycarbonate (PC) resin, ABS resin

Weight

Approx. 150 g

Mounting

DIN Track

Item

Model

V680-HAM91

V680-HAM81

Rated voltage

24 VDC (

−15% to +10%) including 10% ripple (p-p)

Power consumption

3.5 W (24 VDC, 150 mA max. except external I/O line current)

Input specifications

Transistor output

Short-circuit current: 3 mA (typical) (for short-circuit between IN terminal and 0 V), OFF voltage: 15 to

30 VDC, ON voltage: 0 to 5 VDC, Input impedance: 8.2 k

Ω, Applied voltage: 30 VDC max.

Output specifications

NPN open-collector output 30 VDC, 20 mA max.,

Residual voltage: 2 V max.

PNP open-collector output 30 VDC, 20 mA max.,

Residual voltage: 2 V max.

Ambient operating

temperature

−10 to 55°C (with no icing)

Ambient storage

temperature

−25 to 65°C (with no icing)

Ambient operating

humidity

25% to 85% (with no condensation; ambient operating temperature is 40°C max. at humidity of 85%)

Insulation resistance

20 M

Ω min. (at 500 VDC) between all terminals excluding the FG terminal and the case

Dielectric strength

1,000 VAC (50/60 Hz) applied for 1 minute between all terminals excluding the FG terminal and the case

Vibration resistance

each

Shock resistance

Appearance

90 × 30 × 65 mm (excluding protrusions)

Degree of protection

IEC 60529, IP40

Materials

Polycarbonate (PC) resin, ABS resin

Weight

Approx. 130 g

Mounting

DIN Track