| 数据搜索系统,热门电子元器件搜索 |
|
UB242CG-AG6-R 数据表(PDF) 4 Page - Unisonic Technologies |
|
|
|||||||||||||||||||||||||||||
UB242CG-AG6-R 数据表(HTML) 4 Page - Unisonic Technologies |
|
4 / 13 page ![]() UB242 Preliminary CMOS IC UNISONICTECHNOLOGIESCO.,LTD 4 of 13 www.unisonic.com.tw QW-R502-307.e ABSOLUTE MAXIMUM RATING (VSS=0V, Ta=25°С unless otherwise specified) ELECTRICAL CHARACTERISTICS (VSS=0V, DS=Floating, Ta=25°С unless otherwise specified) PARAMETER SYMBOL RATINGS UNIT Input voltage between VDD and VSS (Note2) VDD VSS-0.3 ~ VSS+12 V OC output pin voltage VOC VDD-15 ~ VDD+0.3 V OD output pin voltage VOD VSS-0.3 ~ VDD+0.3 V CSI input pin voltage VCSI VDD-15 ~ VDD+0.3 V DS input pin voltage VDS VSS-0.3 ~ VDD+03 V Operating Temperature TORP -40 ~ +85 °С Storage Temperature TSTG -40 ~ +125 °С Note: 1. Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. 2. Pulse (μsec) noise exceeding the above input voltage (VSS+12V) may cause damage to the IC. PARAMETER SYMBOL TEST CONDITIONS MIN TYP MAX UNIT CURRENT CONSEMPTION Supply Current IDD VDD=3.9V 3.0 6.0 μA Power-Down Current IPD VDD=2.0V 0.1 μA OPERATING VOLTAGE Operating Input Voltage VDS1 VDD-VSS 1.8 9.0 V DETECTION VOLTAGE Overcharge Detection Voltage VOCU VOCU -0.050 VOCU VOCU +0.050 V Overcharge Release Voltage VOCR VOCR -0.050 VOCR VOCR +0.050 V Overdischarge Detection Voltage VODL VODL -0.100 VODL VODL +0.100 V Overdischarge Release Voltage VODR VODR -0.100 VODR VODR +0.100 V Over Current Detection Voltage VOI1 VOI1 -0.030 VO/1 VOI1 +0.030 V Short Circuit Detection Voltage VOI2 VDD=3.0V 1.0 1.35 1.75 V Reset Resistance For Over Current Protection RSHORT VDD=3.6V 350 500 650 kΩ Charger Detection Voltage VCH -1.2 -0.7 -0.2 V DELAY TIME VDD=3.6V to4.5V, DS=Floating 0.7 1.3 1.9 s Overcharge Detection Delay Time TOC VDD=3.6V to 4.5V, VDS=VDD 10 20 30 ms VDD=3.6V to 2.0V, DS=Floating 100 180 260 ms Overdischarge Detection Delay Time TOD VDD=3.6V to 2.0V, VDS=VDD 6 11 17 ms Over Current Detection Delay Time TOI1 VDD=3.0V 5 10 20 ms Short Circuit Detection Delay Time TOI2 VDD=3.0V 5 10 50 µs OTHER OC Pin Output “H” Voltage VOH1 VDD=3.9V, IOH=-50μA 3.4 3.7 V OC Pin Output “L” Voltage VOL1 VDD=4.5V, CSI=0V 0.1 0.5 V OD Pin Output “H” Voltage VOH2 VDD=3.9V, IOH=-50μA 3.4 3.7 V OD Pin Output “L” Voltage VOL2 VDD=2.0V, IOL=50μA 0.1 0.5 V Note: If VDS=VDD, the delay time will be reduced, and the test time for VOCU or VODL will also be reduced. |
|
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |