106963 datasheet(11/25 Pages) PHOENIX

11 / 25 page

TRIO-PS-2G/1AC/12DC/5/C2LPS

106963_en_00

PHOENIX CONTACT 11 / 25

Safety regulations and installation

notes

Before startup please ensure:

–

Installation and startup may only be

carried out by qualified personnel.

–

The relevant country-specific regulations

must be observed.

NOTE: Danger if used improperly

–

The device is a built-in device.

–

The IP20 degree of protection

(IEC 60529/EN 60529) of the device is

intended for use in a clean and dry

environment. Do not subject the device to

any load that exceeds the described

limits.

–

Do not subject the device to mechanical

and/or thermal loads that exceed the

specified limits.

–

It is not permissible to open or modify the

device. Do not repair the device yourself

but replace it with an equivalent device.

Repairs may only be carried out by the

manufacturer. The manufacturer is not

liable for damage resulting from violation.

CAUTION:

Before startup please ensure:

–

Connection must be performed by

specialist personnel and protection

against electric shock ensured.

–

It must be possible to switch off the

device outside the power supply

according to the regulations in EN 60950-

1 (e.g., by line protection on the primary

side).

–

All feed lines are sufficiently protected

and dimensioned!

–

All output lines are dimensioned

according to the maximum output current

of the device or separately protected!

–

Sufficient convection is guaranteed!

EXPLOSION HAZARD!

Only remove equipment when it is

disconnected and not in the potentially

explosive area.

DANGER

Never carry out work on live parts!

The housing can become very hot, depending

on the ambient temperature and load!

106963 数据表(PDF) 11 Page - PHOENIX CONTACT

106963 数据表(HTML) 11 Page - PHOENIX CONTACT

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25

数据表下载