Filterless, High Efficiency,

Mono 2.8 W, Class-D Audio Amplifier

Data Sheet

SSM2305

Rev. B

Document Feedback

Information furnished by Analog Devices is believed to be accurate and reliable. However, no

responsibilityis assumedbyAnalogDevicesforitsuse,norforanyinfringementsof patentsorother

rightsofthirdpartiesthatmayresultfromitsuse.Specificationssubjecttochangewithoutnotice.No

license is granted by implication or otherwise under any patent or patent rights of Analog Devices.

Trademarksandregisteredtrademarksarethepropertyoftheirrespectiveowners.

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.

Tel: 781.329.4700

©2008–2016 Analog Devices, Inc. All rights reserved.

Technical Support

www.analog.com

FEATURES

Filterless Class-D amplifier with Σ-Δ modulation

No sync necessary when using multiple Class-D amplifiers

from Analog Devices, Inc.

2.8 W into 4 Ω load and 1.6 W into 8 Ω load at 5.0 V supply

with <10% total harmonic distortion (THD)

89% efficiency at 5.0 V, 1.3 W into 8 Ω speaker

>98 dB signal-to-noise ratio (SNR)

Single-supply operation from 2.5 V to 5.5 V

20 nA ultralow shutdown current

Short-circuit and thermal protection

Available in 8-lead, 3 mm × 3 mm LFCSP and MSOP

Pop-and-click suppression

Built-in resistors reduce board component count

Fixed and user-adjustable gain configurations

APPLICATIONS

Mobile phones

MP3 players

Portable gaming

Portable electronics

Educational toys

GENERAL DESCRIPTION

The SSM2305 is a fully integrated, high efficiency, Class-D

audio amplifier designed to maximize performance for mobile

phone applications. The application circuit requires a minimum

of external components and operates from a single 2.5 V to 5.5 V

supply. It is capable of delivering 2.2 W of continuous output

power with less than 1% THD + N driving a 4 Ω load from a

5.0 V supply. It has built-in thermal shutdown and output short-

circuit protection.

The SSM2305 features a high efficiency, low noise modulation

scheme that does not require external LC output filters. The modu-

lation provides high efficiency even at low output power. The

SSM2305 operates with 90% efficiency at 1.3 W into 8 Ω or 83%

efficiency at 2.2 W into 4 Ω from a 5.0 V supply and has an SNR of

>98 dB. Spread-spectrum pulse density modulation is used to

provide lower EMI-radiated emissions compared with other

Class-D architectures.

The SSM2305 has a micropower shutdown mode with a maximum

shutdown current of 30 nA. Shutdown is enabled by applying

a Logic 0 to the SD pin. The device also includes pop-and-click

suppression circuitry. This minimizes voltage glitches at the

output during turn-on and turn-off, thus reducing audible noise

on activation and deactivation.

The fully differential input of the SSM2305 provides excellent

rejection of common-mode noise on the input. Input coupling

capacitors can be omitted if the dc input common-mode voltage

The SSM2305 has excellent rejection of power supply noise,

including noise caused by GSM transmission bursts and RF

rectification. PSRR is typically 60 dB at 217 Hz.

The default gain of the SSM2305 is 18 dB, but users can reduce the

gain by using a pair of external resistors.

The SSM2305 is specified over the commercial temperature range

(−40°C to +85°C). It is available in both an 8-lead, 3 mm × 3 mm

lead frame chip scale package (LFCSP) and an 8-lead mini small

outline package (MSOP).

FUNCTIONAL BLOCK DIAGRAM

SHUTDOWN

0.1µF

VDD

POP/CLICK

SUPPRESSION

OUT+

OUT–

IN+

VBATT

2.5V TO 5.5V

IN–

MODULATOR

(Σ-∆)

GND

10µF

47nF*

*INPUT CAPACITORS ARE OPTIONAL IF INPUT DC COMMON-MODE VOLTAGE IS

47nF*

SD

AUDIO IN–

AUDIO IN+

SSM2305

37kΩ

296kΩ

296kΩ

37kΩ

FET

DRIVER

BIAS

INTERNAL

OSCILLATOR

Figure 1.