SPEC NO: DSAI2368

REV NO: V.6B

ATE: JUN/21/2016

PAGE: 3 OF 6

APPROVED: Wynec

CHECKED: Allen Liu

DRAWN: L.T.Zhang

ERP: 1201002822

Selection Guide

Absolute Maximum Ratings at TA=25°C

Electrical / Optical Characteristics at TA=25°C

Part No.

Emitting Color (Material)

Lens Type

Viewing

Angle [1]

Min.

Typ.

2θ1/2

KA-4008ZGS

Green (InGaN)

Water Clear

500

800

120

°

Iv (mcd) [2]

@ 20mA

Symbol

Parameter

Emitting Color

Typ.

Max.

Units

Test Conditions

λpeak

Peak Wavelength

Green

515

nm

λD [1]

Dominant Wavelength

Green

525

nm

Δλ1/2

Spectral Line Half-width

Green

30

nm

C

Capacitance

Green

45

pF

Forward Voltage

Green

3.3

4.1

V

Reverse Current

Green

50

uA

Parameter

Values

Units

Power dissipation

102.5

mW

DC Forward Current

25

mA

Peak Forward Current [1]

150

mA

Reverse Voltage

5

V

Operating Temperature

-40°C To +85°C

Storage Temperature

-40°C To +85°C

Electrostatic Discharge Threshold (HBM)

450

V

Notes:

1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.

2. Luminous intensity / luminous Flux: +/-15%.

3. Luminous intensity value is traceable to CIE127-2007 standards.

Notes:

1.Wavelength: +/-1nm.

2.Forward Voltage: +/-0.1V.

3.Wavelength value is traceable to CIE127-2007 standards.

4.Excess driving current and/or operating temperature higher than recommended conditions may result in severe light degradation or

premature failure.

Notes:

1. 1/10 Duty Cycle, 0.1ms Pulse Width.

2. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity – Ref

JEDEC/JESD625-A and JEDEC/J-STD-033.

Kingbright