CFA633-RDI-KS datasheet(13/88 Pages) CRYSTAIFONTZ

13 / 88 page

Crystalfontz America, Inc.

Data Sheet Release Date 2012/02/21

www.crystalfontz.com

CFA633-RDI-KS LCD Module (Hardware v2.0 / Firmware s2v1)

February 2012

Page 13

Buy Cables Separately

Cable lengths are approximate. Common configurations are described in the section CONNECTION

INFORMATION (Pg. 25). Additional cables are available on our website.

Crystalfontz

Cable

Description

All cables are RoHS compliant

WR-PWR-Y12

~13 inches

Cable allows you to plug a 4-pin “hard drive style” Molex power connector into the module's “floppy drive

style” power connector, plus provides an additional female 4-pin Molex connector.

WR-232-Y08

~27 inches

Use this ribbon cable to supply communications. Connect cable’s 10-pin female connector to the module’s

J_RS232 male connector. Connect cable’s RS232 DB9 9-pin female connector to host’s DB9 9-pin male

serial port.

WR-232-Y13

~36 inches

DB9 male ribbon cable with PC expansion slot bracket. Connect cable’s 10-pin female connector to the

module’s J_RS232 male connector. Connect the cable’s DB9 male connector to host’s DB9 female con-

nector.

WR-232-Y22

~26 inches

Use this cable to supply communications. Connect one of the 10-pin female connectors to the module’s’

J_RS232 10-pin male connector. Connect cable’s second 10-pin female connector to host’s motherboard

10-pin male connector (standard or alternate pinout).

WR-232-Y23

~26 inches

Connect cable’s 10-pin female connector to module’s J_RS232 10-pin male connector. Connect cable’s 9-

pin female DB9 connector to host’s 9-pin male DB9 connector (standard or alternate pinout).

WR-PWR-Y14

~24 inches

Use this ATX power cable to turn an ATX power supply on and off, or power cycle the host through the

module. Requires optional 7-in female connector at J8 on module. Select J8 connector after you click on

the module’s website page button “Customize and Add to Cart”. Connect the cable’s male 7-pin connector

to the module’s J8 female connector.

WR-FAN-X01

~16 inches

Connect up to four cables to connect up to four fans. Connect cable’s 3-pin male connector to module’s

connectors labeled FAN1, FAN2, FAN3, or FAN4. Connect cable’s 3-pin female connector to a fan’s con-

nector. (Fans are not sold by Crystalfontz.)

WR-DOW-Y17

~12 inches + ~12

inches between

connectors

Connect (“daisy chain”) up to 32 of these DOW (Dallas One-Wire) DS18B20 temperature sensor cables.

Requires optional DOW connector at J_DOW on module. Select DOW connector after you click on the

module’s website page button “Customize and Add to Cart”.

CFA633-RDI-KS 数据表(PDF) 13 Page - Crystalfontz America, Inc.

CFA633-RDI-KS 数据表(HTML) 13 Page - Crystalfontz America, Inc.

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88

数据表下载