MCP23008-ESLASHSS datasheet(21/40 Pages) MICROCHIP

21 / 40 page

DS21919B-page 21

MCP23008/MCP23S08

2.0

ELECTRICAL CHARACTERISTICS

Absolute Maximum Ratings †

Ambient temperature under bias............................................................................................................ .-40°C to +125°C

Storage temperature .............................................................................................................................. -65°C to +150°C

Voltage on VDD with respect to VSS ......................................................................................................... -0.3V to +5.5V

Voltage on all other pins with respect to VSS (except VDD)............................................................. -0.6V to (VDD + 0.6V)

Total power dissipation (Note) ............................................................................................................................. 700 mW

Maximum current out of VSS pin ........................................................................................................................... 150 mA

Maximum current into VDD pin .............................................................................................................................. 125 mA

Input clamp current, IIK (VI < 0 or VI > VDD)

...................................................................................................................... ±20 mA

Output clamp current, IOK (VO < 0 or VO > VDD)

.............................................................................................................. ±20 mA

Maximum output current sunk by any output pin .................................................................................................... 25 mA

Maximum output current sourced by any output pin ...............................................................................................25 mA

Note:

Power dissipation is calculated as follows:

PDIS = VDD x {IDD -

∑ IOH} + ∑ {(VDD-VOH) x IOH} + ∑(VOL x IOL)

† NOTICE: Stresses above those listed under “Absolute Maximum Ratings” may cause permanent damage to the

device. This is a stress rating only and functional operation of the device at those or any other conditions above those

indicated in the operation listings of this specification is not implied. Exposure to maximum rating conditions for

extended periods may affect device reliability.

MCP23008-E/SS 数据表(PDF) 21 Page - Microchip Technology

MCP23008-E/SS 数据表(HTML) 21 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40

数据表下载