Input/output ports

USB 2.0 high-speed host port

Supports USB mass storage devices, printers and keyboard. One port on front and one port on rear of instrument.

USB 2.0 device port

Rear-panel connector allows for communication/control of oscilloscope through USBTMC or GPIB (with a TEK-USB-488), and

direct printing to PictBridge-compatible printers.

Printing

Print to network printer, PictBridge printer, or to a printer that supports e-mail printing. Note: This product includes software

developed by the OpenSSL Project for use in the OpenSSL Toolkit. (http://www.openssl.org/)

LAN port

RJ-45 connector, supports 10/100 Mb/s

Video out port

DB-15 female connector, connect to show the oscilloscope display on an external monitor or projector. SVGA resolution.

Auxilliary input (typical)

(Available on two-channel models only)

Front-panel BNC connector

Input impedance, 1 MΩ

Maximum input

Probe compenstor output voltage

and frequency

Front-panel pins

Amplitude

0 to 2.5 V

Frequency

1 kHz

Auxiliary out

Rear-panel BNC connector

Output can be configured to provide a pulse out signal when the oscilloscope triggers, a trigger signal from the internal arbitrary

function generator, or an event out for limit/mask testing.

Kensington-style lock

Rear-panel security slot connects to standard Kensington-style lock.

VESA mount

Standard (MIS-D 75) 75 mm VESA mounting points on rear of instrument.

LAN eXtensions for Instrumentation (LXI)

Class

LXI Core 2011

Version

V1.4

Datasheet

30 www.tek.com