INA4180

(quad-channel)

INA2180

(dual-channel)

INA180

(single-channel)

2.7 V to 5.5 V

ADC

Microcontroller

Up To 26 V

GND

VS

Load

IN±

IN+

OUT

+

±

0.1 µF

Copyright © 2017, Texas Instruments Incorporated

Product

Folder

Order

Now

Technical

Documents

Tools &

Software

Support &

Community

An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,

intellectual property matters and other important disclaimers. PRODUCTION DATA.

INA180, INA2180, INA4180

SBOS741G – APRIL 2017 – REVISED APRIL 2020

INAx180 Low- and High-Side Voltage Output, Current-Sense Amplifiers

1

1 Features

1

•

•

High bandwidth: 350 kHz (A1 devices)

•

Offset voltage:

–

–

•

Output slew rate: 2 V/µs

•

Accuracy:

–

±1% gain error (maximum)

–

1-µV/°C offset drift (maximum)

•

Gain options:

–

20 V/V (A1 devices)

–

50 V/V (A2 devices)

–

100 V/V (A3 devices)

–

200 V/V (A4 devices)

•

Quiescent current: 260 µA maximum (INA180)

2 Applications

•

Motor control

•

Battery monitoring

•

Power management

•

Lighting control

•

Overcurrent detection

•

Solar inverters

3 Description

The INA180, INA2180, and INA4180 (INAx180)

current sense amplifiers are designed for cost-

optimized applications. These devices are part of a

family of current-sense amplifiers (also called current-

shunt monitors) that sense voltage drops across

current-sense resistors at common-mode voltages

from –0.2 V to +26 V, independent of the supply

voltage. The INAx180 integrate a matched resistor

gain network in four, fixed-gain device options: 20

V/V, 50 V/V, 100 V/V, or 200 V/V. This matched gain

resistor network minimizes gain error and reduces the

temperature drift.

All these devices operate from a single 2.7-V to 5.5-V

power supply. The single-channel INA180 draws a

maximum supply current of 260 µA; whereas, the

dual-channel INA2180 draws a maximum supply

current of 500 µA, and the quad channel draws a

maximum supply current of 900 µA.

The INA180 is available in a 5-pin, SOT-23 package

with two different pin configurations. The INA2180 is

available in 8-pin, VSSOP and WSON packages. The

INA4180 is available in a 14-pin, TSSOP package. All

device options are specified over the extended

operating temperature range of –40°C to +125°C.

Device Information(1)

PART NUMBER

PACKAGE

BODY SIZE (NOM)

INA180

SOT-23 (5)

2.90 mm × 1.60 mm

INA2180

VSSOP (8)

3.00 mm × 3.00 mm

WSON (8)

2.00 mm × 2.00 mm

INA4180

TSSOP (14)

5.00 mm × 4.40 mm

(1) For all available packages, see the package option addendum

at the end of the datasheet.

Typical Application Circuit