IS25LP256D-RGLA3 datasheet(158/174 Pages) ISSI

部件名	IS25LP256D-RGLA3

功能描述	SERIAL FLASH MEMORY WITH 166/133MHZ MULTI I/O SPI & QUAD I/O QPI DTR INTERFACE

PDF	174 Pages

Scroll/Zoom	100%

制造商	ISSI [Integrated Silicon Solution, Inc]

网页	http://www.issi.com

标志

158 / 174 page

IS25LP256D

IS25WP256D

Integrated Silicon Solution, Inc.- www.issi.com

158

Rev A6

04/15/2019

8.65 GANG SECTOR/BLOCK UNLOCK OPERATION (GBUN, 98h)

The Gang Sector/Block Unlock (GBUN) instruction provides a quick method to clear all DYB (Dynamic Protection

Bit)

bits to “1” at once.

The sequence of issuing GBUN instruction is: drive CE# low  send GBUN instruction code  drive CE# high.

The instruction code will be shifted into the device on the rising edge of SCK.

The GBUN command is accepted in both SPI and QPI mode. The CE# must go high exactly at the byte boundary,

otherwise, the instruction will be ignored and not be executed. While the GBUN operation is in progress, the Status

bit is “1” during the GBUN operation, and is “0” when it is completed.

Figure 8.150 Gang Sector/Block Unlock Sequence In SPI Mode

Instruction = 98h

CE#

SCK

Mode 3

Mode 0

High Impedance

Figure 8.151 Gang Sector/Block Unlock Sequence In QPI Mode

98h

CE#

SCK

IO[3:0]

Mode 3

Mode 0

IS25LP256D-RGLA3 数据表(PDF) 158 Page - Integrated Silicon Solution, Inc