Attention

1, Any and all Winsok power products described or contained herein do not have specifications that can handle

applications that require extremely high levels of reliability, such as life support systems, aircraft's control systems, or

other applications whose failure can be reasonably expected to result in serious physical and/or material damage.

Consult with your Winsok power representative nearest you before using any Winsok power products described or

contained herein in such applications.

2,Winsok power assumes no responsibility for equipment failures that result from using products at values that exceed,

even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in

products specifications of any and all Winsok power products described or contained herein.

3, Specifications of any and all Winsok power products described or contained herein stipulate the performance,

characteristics, and functions of the described products in the independent state, and are not guarantees of the

performance, characteristics, and functions of the described products as mounted in the customer’s products or

equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always

evaluate and test devices mounted in the customer’s products or equipment.

4, Winsok power Semiconductor CO., LTD. strives to supply high quality high reliability products. However, any and all

semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents

or events that could endanger human lives that could give rise to smoke or fire, or that could cause damage to other

property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such

measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design,

and structural design.

5,In the event that any or all Winsok power products(including technical data, services) described or contained herein are

controlled under any of applicable local export control laws and regulations, such products must not be exported without

obtaining the export license from the authorities concerned in accordance with the above law.

6, No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical,

including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior

written permission of Winsok power Semiconductor CO., LTD.

7, Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for

volume production. Winsok power believes information herein is accurate and reliable, but no guarantees are made or

implied regarding its use or any infringements of intellectual property rights or other rights of third parties.

8, Any and all information described or contained herein are subject to change without notice due to product/technology

improvement,etc. When designing equipment, refer to the "Delivery Specification" for the Winsok power product that you

Intend to use.

9, this catalog provides information as of Sep.2014. Specifications and information herein are subject to change without

notice.