| 数据搜索系统,热门电子元器件搜索 |
|
ST7LITE35 数据表(PDF) 88 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
ST7LITE35 数据表(HTML) 88 Page - STMicroelectronics |
|
88 / 167 page ![]() ST7LITE3 88/167 11.5 LINSCI SERIAL COMMUNICATION INTERFACE (LIN MASTER/SLAVE) 11.5.1 Introduction The Serial Communications Interface (SCI) offers a flexible means of full-duplex data exchange with external equipment requiring an industry standard NRZ asynchronous serial data format. The SCI of- fers a very wide range of baud rates using two baud rate generator systems. The LIN-dedicated features support the LIN (Local Interconnect Network) protocol for both master and slave nodes. This chapter is divided into SCI Mode and LIN mode sections. For information on general SCI communications, refer to the SCI mode section. For LIN applications, refer to both the SCI mode and LIN mode sections. 11.5.2 SCI Features ■ Full duplex, asynchronous communications ■ NRZ standard format (Mark/Space) ■ Independently programmable transmit and receive baud rates up to 500K baud. ■ Programmable data word length (8 or 9 bits) ■ Receive buffer full, Transmit buffer empty and End of Transmission flags ■ Two receiver wake-up modes: – Address bit (MSB) – Idle line ■ Muting function for multiprocessor configurations ■ Separate enable bits for Transmitter and Receiver ■ Overrun, Noise and Frame error detection ■ Six interrupt sources – Transmit data register empty – Transmission complete – Receive data register full – Idle line received – Overrun error – Parity interrupt ■ Parity control: – Transmits parity bit – Checks parity of received data byte ■ Reduced power consumption mode 11.5.3 LIN Features – LIN Master – 13-bit LIN Synch Break generation – LIN Slave – Automatic Header Handling – Automatic baud rate re-synchronization based on recognition and measurement of the LIN Synch Field (for LIN slave nodes) – Automatic baud rate adjustment (at CPU fre- quency precision) – 11-bit LIN Synch Break detection capability – LIN Parity check on the LIN Identifier Field (only in reception) – LIN Error management – LIN Header Timeout – Hot plugging support 1 |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |