| 数据搜索系统,热门电子元器件搜索 |
|
CS4210 数据表(PDF) 79 Page - National Semiconductor (TI) |
|
|
|
|||||||||||||||||||||||||||||
CS4210 数据表(HTML) 79 Page - National Semiconductor (TI) |
|
79 / 102 page ![]() Revision 1.0 79 www.national.com Register Descriptions (Continued) 4.4.23 Physical Request Filter Registers If an asynchronous request is allowed from a node, and the offset is 0000_FFFF_FFFFh, the sourceID of the request is used as an index into the PhysicalRequestFilter. If the cor- responding bit in the PhysicalRequestFilter is set to 0, then the request is forwarded to the Asynchronous Request Receive DMA context. If, however, the bit is set to 1, then the request is sent to the physical response unit. (Note that within the physical range, lock transactions and block trans- actions with a non-zero extended tcode are always for- warded to the Asynchronous Request Receive DMA context (see Section 3.6 "Physical Requests" on page 26.). This register is set and clear. If bit physReqResourceN is set, then requests with a sourceID of either {3FFh, #n} or {busID, #n} (where n is the node number) are accepted. If the physReqResourceAllBuses bit is set in PhysicalRe- questFilterHi, physical requests from any device on any other bus are accepted (bus number other than 3FFh and busID). Physical requests that are rejected by the Physical- RequestFilter are sent to the AR Request DMA context if the AR Request DMA context is enabled. If it is disabled, then the CS4210 ignores the requests. Reading the Physi- calRequestFilter registers returns their current state. All bits in the PhysicalRequestFilter are set to 0 on a 1394 bus reset. Table 4-39. BAR0+Offset 110h (Set) and 114h (Clear): PhysicalRequestHi Register Bit Name Access Reset Description 31 physReqRe- sourceAllBuses RSCU 0 Asynchronous Physical Requests Resource All Buses: If setto one,all asynchronous physical requests received by the CS4210 from non-local bus nodes are accepted. 30:0 physReqResourceN RSCU 00h Asynchronous Physical Requests Resource [62:32]: If set to one for local bus node number N, then asynchronous physical requests received by the CS4210 from that node are accepted. Table 4-40. BAR0+Offset 118h (Set) and 11Ch (Clear): PhysicalRequestLo Register Bit Name Access Reset Description 31:0 physReqResourceN RSCU 00h Asynchronous Physical Requests Resource [31:0]: If set to one for local bus node number N, then asynchronous physical requests received by the CS4210 from that node are accepted. |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |