www.sensirion.com

Version 1.0 – July 2020 – D1

7/19

Parameter

Rating

Supply voltage

−0.3 to +3.6 V

Supply voltage

−0.3 to +3.6 V

−40 to +70 °C

Operating temperature range

−20 to +55 °C

0 to 80 % (non-condensing)

Operating humidity range

0 to 90 % (non-condensing)

ESD HBM

2 kV

ESD CDM

500 V

Latch up, JESD78 Class II, 125 °C

100 mA

Table 5 Absolute minimum and maximum ratings.

2.5 Interface Specifications

a capacitor of 1

page 5). It should be noted that pull-up resistors may be included in I/O circuits of microcontrollers. The die pad or center pad is

electrically connected to GND. Hence, electrical considerations do not impose constraints on the wiring of the die pad. However,

for mechanical stability it is recommended to solder the die pad to the PCB.

Pin

Name

Comments

1

Supply voltage

2

Ground

3

SDA

Serial data, bidirectional

4

n/a

Connect to ground (no electrical function)

5

Supply voltage, hotplate

6

SCL

Serial clock, bidirectional

Table 6 Pin assignment (transparent top view). Dashed lines are only visible from the bottom.

12

Short-term storage refers to temporary conditions during, e.g., transport.