MODEL: JPR2

JPR2 SPECIFICATIONS

ES-1580 Rev.10 Page 3/7

http://www.m-system.co.jp/

OUTPUT SPECIFICATIONS

Output pulse: No. of input pulse × scaling factor (scaling

factor = output pulse set count / input pulse set count)

Scalable range: 1/1 000 000 to 1 000 000

■ Open Collector: 50 V DC @ 50 mA (resistive load)

Saturation voltage: 0.6 V DC

Maximum frequency: 100 kHz

■ Voltage Pulse

H level: Rating (5, 12 or 24 V) ±10 %

L level: ≤ 0.5 V

Load resistance: ≥ 1 kΩ (5 V), ≥ 2.4 kΩ (12 V),

≥ 4.8 kΩ (24 V)

Maximum frequency: 100 kHz

■ Noncontact AC/DC Switch: 120 V AC or 120 V DC @200

mA (resistive load)

ON resistance: 3 Ω

Maximum frequency: 20 Hz

Rise time: 5 msec.

Sink time: 3 msec.

■ RS-422 Line Driver Pulse

Transmitter: Conforms to RS-422

Maximum frequency: 100 kHz

OUTPUT PULSE WIDTH

• No conversion to one-shot: Duty ratio approx. 50 %;

Internal digital computation calculates the pulse width.

• One-shot Output: Preset pulse width ±20 %

Optional pulse width: 30 μsec. – 300 msec.

INSTALLATION

Power input

•AC: Operational voltage range 85 – 132 V,

47 – 66 Hz, approx. 6 VA

•DC: Operational voltage range: Rating ±10 %, or 85 – 150

V for 110 V rating; ripple 10 %p-p max.; Approx. 3.3 W (140

mA at 24 V)

Operating temperature: -5 to +60°C (23 to 140°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Mounting: Surface or DIN rail

Weight: 400 g (0.88 lb)

PERFORMANCE

Response time: Sampling time + 50 msec.

The response time equals the interval between the first

input pulse and the first output pulse.

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 2000 V AC @ 1 minute (input or sensor

excitation to output to power to ground)