MODEL: M5MS

M5MS SPECIFICATIONS

ES-2465 Rev.11 Page 1/3

http://www.m-system.co.jp/

Super-mini Terminal Block Signal Conditioners M5-UNIT

POTENTIOMETER TRANSMITTER

Functions & Features

• Provides a standard DC output proportional to a

potentiometer or slidewire position input

• Constant voltage excitation

• Fast response type available

• High-density mounting

• Power LED

25 (.98)

97

(3.82)

41 (1.61)

mm (inch)

MODEL: M5MS-[1]-[2][3]

ORDERING INFORMATION

• Code number: M5MS-[1]-[2][3]

Specify a code from below for each [1] through [3].

(e.g. M5MS-A-R/K/Q)

• Special output range (For codes Z, 0 & 01)

• Specify the specification for option code /Q

(e.g. /C01/V01/S01)

INPUT

Total resistance 100 Ω – 10 kΩ

[1] OUTPUT

Current

A: 4 – 20 mA DC (Load resistance 550 Ω max.)

D: 0 – 20 mA DC (Load resistance 550 Ω max.)

Z: Specify current (See OUTPUT SPECIFICATIONS)

Voltage

1: 0 – 10 mV DC (Load resistance 100 kΩ min.)

(CE not available)

2: 0 – 100 mV DC (Load resistance 100 kΩ min.)

(CE not available)

3: 0 – 1 V DC (Load resistance 100 Ω min.)

4: 0 – 10 V DC (Load resistance 1000 Ω min.)

5: 0 – 5 V DC (Load resistance 500 Ω min.)

6: 1 – 5 V DC (Load resistance 500 Ω min.)

1W: -10 – +10 mV DC (Load resistance 100 kΩ min.)

(CE not available)

2W: -100 – +100 mV DC (Load resistance 100 kΩ min.)

(CE not available)

3W: -1 – +1 V DC (Load resistance 800 Ω min.)

4W: -10 – +10 V DC (Load resistance 8000 Ω min.)

5W: -5 – +5 V DC (Load resistance 4000 Ω min.)

0: Specify voltage (See OUTPUT SPECIFICATIONS)

01: Specify voltage (See OUTPUT SPECIFICATIONS)

(CE not available)

[2] POWER INPUT

AC Power

M: 85 – 264 V AC (Operational voltage range 85 – 264 V,

47 – 66 Hz)

(CE not available)

DC Power

R: 24 V DC

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

[3] OPTIONS (multiple selections)

Response Time (0 – 90 %)

blank: Standard (≤ 0.5 sec.)

/K: Fast Response (Approx. 25 msec.)

Input Minimum Span

blank: ≥ 70 % of total resistance

/A1: ≥ 50 % of total resistance (CE not available)

(Selectable only current output A, D)

Other Options

blank: none

/Q: Option other than the above (specify the specification)

SPECIFICATIONS OF OPTION: Q (multiple selections)

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

/C02: Polyurethane coating

/C03: Rubber coating

ADJUSTMENT

/V01: Multi-turn fine adjustment

TERMINAL SCREW MATERIAL

/S01: Stainless steel