MODEL: M5MS

M5MS SPECIFICATIONS

ES-2465 Rev.11 Page 2/3

http://www.m-system.co.jp/

GENERAL SPECIFICATIONS

Construction: Terminal block

Connection: M3.5 screw terminals (torque 0.8 N·m)

Screw terminal: Nickel-plated steel (standard) or stainless

steel

Housing material: Flame-resistant resin (black)

Isolation: Input to output to power

Overrange output: Approx. -10 to +110 % at 1 – 5 V

Zero adjustment: 0 – 30 % of total resistance (front)

Span adjustment: 70 – 100 % of total resistance (front)

(For ‘/A1', 50 – 100 % of total resistance (front))

Power LED: Green LED turns on when the power is supplied.

INPUT SPECIFICATIONS

Minimum span: 70% of total resistance

(For ‘/A1', 50% of total resistance)

Excitation: 0.5 V DC

OUTPUT SPECIFICATIONS

■ DC Current: 0 – 20 mA DC

Minimum span: 1 mA

Offset: Max. 1.5 times span

Load resistance: Output drive 11 V max.

■ DC Voltage

•Output code 0 (CE)

Voltage range: -10 – +10 V DC

Minimum span: 1 V

Offset: Max. 1.5 times span

Load resistance: Output drive 10 mA max.; at ≥1 V

Max. 1.25 mA output drive for negative voltage

•Output code 01 (Not CE)

Voltage range: -1 – +1 V DC

Minimum span: 10 mV

Offset: Max. 1.5 times span

Load resistance: Min. 100 kΩ

Min. 1 MΩ for negative voltage

INSTALLATION

Power Consumption

•AC:

Approx. 2 VA at 100 V

Approx. 3 VA at 200 V

Approx. 3 VA at 264 V

•DC: Approx. 2 W

Operating temperature: -5 to +55°C (23 to 131°F)

Operating humidity: 0 to 90 %RH (non-condensing)

Mounting: DIN rail

Weight: 80 g (2.8 oz)

PERFORMANCE in percentage of span

Accuracy: ±0.1 % (For ‘/A1' ±0.2%)

Temp. coefficient: ±0.015 %/°C (±0.008 %/°F) (for ‘/A1'

±0.04%/°C (±0.02%/°F))

Line voltage effect: ±0.1 % over voltage range

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength (input to output to power to ground)

DC powered: 2000 V AC @1 minute

AC powered: 1500 V AC @1 minute

STANDARDS & APPROVALS

EU conformity:

EMC Directive

EMI EN 61000-6-4

EMS EN 61000-6-2

RoHS Directive

EN 50581