MODEL: M6SPP

M6SPP SPECIFICATIONS

ES-7989 Rev.6 Page 2/5

http://www.m-system.co.jp/

■ Voltage Pulse

Maximum frequency: 100 kHz

Pulse width time requirement: ≥ 5 μsec. for high and low

levels

Waveform: Square or sine

Input impedance: ≥ 10 kΩ

Max. voltage between input terminals: 50 V

Detecting H level

5 V pulse: ≥ 3 V

12 V, 24 V pulse: ≥ 6 V

Detecting L level

5 V pulse: ≤ 1 V

12 V, 24 V pulse: ≤ 4 V

■ Two-wire Current Pulse

Max. frequency: 100 kHz

Input resistance: Receiving resistor 200 Ω

Input range: 0 – 25 mA

Detecting levels: ≤ 5 mA for Lo, ≥ 15 mA for Hi

OUTPUT SPECIFICATIONS

■ High Frequency Open Collector:

50 V DC @100 mA (resistive load)

Maximum frequency: 100 kHz

Saturation voltage: 0.5 V DC

■ Low Frequency Open Collector:

50 V DC @100 mA (resistive load)

Maximum frequency: 30 Hz

Timer: Limits ≥ 75 msec. within 75 ±25 msec.

ON time for output logic non-inverted

OFF time for output logic inverted

Saturation voltage: 0.5 V DC

■ Voltage Pulse

Maximum frequency: 100 kHz

High level: Rating (5, 12 or 24 V) ±10 %

Low level: ≤ 0.5 V

Load resistance:

≥ 1.0 kΩ for 5 V

≥ 2.4 kΩ for 12 V

≥ 4.8 kΩ for 24 V

INSTALLATION

Power consumption: Approx. 1 W

Operating temperature: -20 to +55°C (-4 to +131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Mounting: Installation Base (model: M6SBS) or DIN rail

Weight: 60 g (2.1 oz)

PERFORMANCE

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 2000 V AC @1 minute (input to output

to power to ground)

STANDARDS & APPROVALS

EU conformity:

EMC Directive

EMI EN 61000-6-4

EMS EN 61000-6-2

RoHS Directive

EN 50581