MODEL: MFS2

MFS2 SPECIFICATIONS

ES-1383 Rev.6 Page 1/4

http://www.m-system.co.jp/

Plug-in Signal Conditioners M-UNIT

SPLIT-RANGE TRANSMITTER

(isolated four outputs)

Functions & Features

• Generates four isolated signals which could control

multiple final control elements

• PC programmable

• High-density mounting

Typical Applications

• Manipulating multiple valves for split-range control

72

(2.83)

80

(3.15)

139

(5.47)

mm (inch)

MODEL: MFS2–[1][2]–[3][4]

ORDERING INFORMATION

• Code number: MFS2-[1][2]-[3][4]

Specify a code from below for each of [1] through [4].

(e.g. MFS2-A4-M/Q)

• Use Ordering Information Sheet (No. ESU-1383)

• Factory default setting (See “OPERATION DIAGRAM”) will

be used if not otherwise specified.

• Specify the specification for option code /Q

(e.g. /C01/S01)

[1] INPUT

Current

A: 4 – 20 mA DC (Input resistance 250 Ω)

Voltage

4: 0 – 10 V DC (Input resistance 1 MΩ min.)

6: 1 – 5 V DC (Input resistance 1 MΩ min.)

[2] OUTPUT 1 through 4

Current

A: 4 – 20 mA DC (Load resistance 500 Ω max.)

Voltage

4: 0 – 10 V DC (Load resistance 10 kΩ min.)

6: 1 – 5 V DC (Load resistance 5000 Ω min.)

[3] POWER INPUT

AC Power

M: 85 – 264 V AC (Operational voltage range 85 – 264 V,

47 – 66 Hz)

DC Power

R: 24 V DC

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

P: 110 V DC

(Operational voltage range 85 – 150 V, ripple 10 %p-p max.)

[4] OPTIONS

blank: none

/Q: With options (specify the specification)

SPECIFICATIONS OF OPTION: Q (multiple selections)

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

/C02: Polyurethane coating

/C03: Rubber coating

TERMINAL SCREW MATERIAL

/S01: Stainless steel

RELATED PRODUCTS

• PC configurator software (model: MFS2CFG)

Software downloadable at M-System’s web site.

A dedicated cable is required to connect the module to the

PC. Please refer to the internet software download site or

the users manual for the PC configurator for applicable

cable types.

GENERAL SPECIFICATIONS

Construction: Plug-in

Connection: M3.5 screw terminals

Screw terminal: Chromated steel (standard) or stainless

steel

Housing material: Flame-resistant resin (black)

Isolation: Input to output 1 to output 2 to output 3 to output

4 to power

Overrange output: 0 to 100 %

Zero adjustment: -5 to +5 % (PC programming)

Span adjustment: 95 to 105 % (PC programming)

Power LED: Green light turns on in normal operating

conditions.

Programming: Downloaded from PC; I/O characteristics,

high/low limits, fixed output, etc.

Configurator connection: 2.5 dia. miniature jack;

RS-232-C level

Fixed output: Preset fixed outputs provided by contact

signal control at the terminals 5 – 6 (Open or Close trigger

conditions can be programmed.)