MODEL: MFS

MFS SPECIFICATIONS

ES-1379 Rev.13 Page 1/5

http://www.m-system.co.jp/

Plug-in Signal Conditioners M-UNIT

SPLIT-RANGE TRANSMITTER

Functions & Features

• Generating two signals which control two final control

elements

• High-density mounting

Typical Applications

• Balancing two final control elements in opposite actions

used in heating-cooling or humidifying-dehumidifying

processes

50

(1.97)

136

(5.35)

80

(3.15)

mm (inch)

MODEL: MFS–[1]–[2][3][4]–[5][6]

ORDERING INFORMATION

• Code number: MFS-[1]-[2][3][4]-[5][6]

Specify a code from below for each of [1] through [6].

(e.g. MFS-V-AAA-B/Q)

• Specify the specification for option code /Q

(e.g. /C01/S01)

[1] OUTPUT CHARACTERISTICS

V: V-shape

P: Parallel

Output 2 is assigned to the reversed output in V-shape

characteristics.

[2] INPUT

Current

A: 4 – 20 mA DC (Input resistance 250 Ω)

Voltage

4: 0 – 10 V DC (Input resistance 200 kΩ min.)

I/O code combination avaliable AAA or 444 suffix codes

only.

[3] OUTPUT 1

Current

A: 4 – 20 mA DC (Load resistance 600 Ω max.)

Voltage

4: 0 – 10 V DC (Load resistance 10 kΩ min.)

[4] OUTPUT 2

Current

A: 4 – 20 mA DC (Load resistance 600 Ω max.)

Voltage

4: 0 – 10 V DC (Load resistance 10 kΩ min.)

[5] POWER INPUT

AC Power

B: 100 V AC

C: 110 V AC

D: 115 V AC

F: 120 V AC

G: 200 V AC

H: 220 V AC

J: 240 V AC

DC Power

R: 24 V DC

[6] OPTIONS

blank: none

/Q: With options (specify the specification)

SPECIFICATIONS OF OPTION: Q (multiple selections)

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

/C02: Polyurethane coating

/C03: Rubber coating

TERMINAL SCREW MATERIAL

/S01: Stainless steel

GENERAL SPECIFICATIONS

Construction: Plug-in

Connection: M3.5 screw terminals

Screw terminal: Chromated steel (standard) or stainless

steel

Housing material: Flame-resistant resin (black)

Isolation: Input or output 1 or output 2 to power

Input range: 0 – 23.2 mA DC or -1 – +12 V DC

Output range: 0 – 23.2 mA DC or -1 – +12 V DC

Output characteristics

• V-shape: two signals vary in opposite directions; used

when both final control devices have the same action (direct

-direct or reverse-reverse).

• Parallel: two signals vary in the same direction; used when

one final control device is direct and another is reverse.

Monitor jacks: Direct monitoring of output signal; accessible

at front