| 数据搜索系统,热门电子元器件搜索 |
|
ADPD188GG 数据表(PDF) 46 Page - Analog Devices |
|
|
|||||||||||||||||||||||||||||
ADPD188GG 数据表(HTML) 46 Page - Analog Devices |
|
46 / 61 page ![]() ADPD188GG Data Sheet Rev. B | Page 46 of 61 LED CONTROL REGISTERS Table 27. LED Control Registers Address Data Bit Default Value Access Name Description 0x14 [15:12] 0x0 R/W Reserved Write 0x0 to these bits for proper operation. [11:8] 0x5 R/W SLOTB_PD_SEL PDx connection selection for Time Slot B. See the Time Slot Switch section for detailed descriptions. [7:4] 0x4 R/W SLOTA_PD_SEL PDx connection selection for Time Slot A. See the Time Slot Switch section for detailed descriptions. [3:2] 0x0 R/W SLOTB_LED_SEL Time Slot B LED configuration. These bits determine which LED is associated with Time Slot B. 0x0: pulse PDx connection to AFE. Float mode and pulse connect mode enable. 0x1: LEDX1 pulses during Time Slot B. 0x2: LEDX2 pulses during Time Slot B. 0x3: LEDX3 pulses during Time Slot B. [1:0] 0x1 R/W SLOTA_LED_SEL Time Slot A LED configuration. These bits determine which LED is associated with Time Slot A. 0x0: pulse PDx connection to AFE. Float mode and pulse connect mode enable. 0x1: LEDX1 pulses during Time Slot A. 0x2: LEDX2 pulses during Time Slot A. 0x3: LEDX3 pulses during Time Slot A. 0x22 [15:14] 0x0 R/W Reserved Write 0x0. 13 0x1 R/W ILED3_SCALE LEDX3 current scale factor. 1: 100% strength. 0: 10% strength; sets the LEDX3 driver in low power mode. LEDX3 Current Scale = 0.1 + 0.9 × (Register 0x22, Bit 13). 12 0x1 R/W Reserved Write 0x1. [11:7] 0x0 R/W Reserved Write 0x0. [6:4] 0x0 R/W ILED3_SLEW LEDX3 driver slew rate control. The slower the slew rate, the safer the performance in terms of reducing the risk of overvoltage of the LED driver. 0x0: the slowest slew rate. … 0x7: the fastest slew rate. [3:0]1 0x0 R/W ILED3_COARSE LEDX3 coarse current setting. Coarse current sink target value of LEDX3 in standard operation. 0x0: lowest coarse setting. … 0xF: highest coarse setting. LED3PEAK = LED3COARSE × LED3FINE × LED3SCALE where: LED3PEAK is the LEDX3 peak target value (mA). LED3COARSE = 44.5 + 17.8 × (Register 0x22, Bits[3:0]). LED3FINE = 0.73 + 0.022 × (Register 0x25, Bits[15:11]). LED3SCALE = 0.1 + 0.9 × (Register 0x22, Bit 13). 0x23 [15:14] 0x0 R/W Reserved Write 0x0. 13 0x1 R/W ILED1_SCALE LEDX1 current scale factor. 1: 100% strength. 0: 10% strength; sets the LEDX1 driver in low power mode. LEDX1 Current Scale = 0.1 + 0.9 × (Register 0x23, Bit 13). 12 0x1 R/W Reserved Write 0x1. [11:7] 0x0 R/W Reserved Write 0x0. |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |