It embeds an MCU (STM32F031x6x7) featuring an ARM® 32-bit Cortex®-M0 CPU

and a 250V triple half bridge gate driver, able to drive N-channel power MOSFETs or

IGBTs.

A comparator featuring advanced smartSD function is integrated in the device,

ensuring fast and effective protection against overload and overcurrent.

The high-voltage bootstrap diodes are also integrated, as well as anti cross-

conduction (interlocking), deadtime and UVLO protection on both the lower and

upper driving sections, which prevents the power switches from operating in low

efficiency or dangerous conditions. Matched delays between low and high-side

sections guarantee no cycle distortion.

The integrated MCU allows performing FOC, 6-step sensorless and other advanced

driving algorithm including the speed control loop.

It has WR and RD protection for embedded flash memory to prevent unwanted

writing and reading, and it can be put in standby mode to reduce the power

consumption.

The MCU provides 21 general-purpose I/O ports (GPIO) with 5 V tolerant capability,

one 12-bit analog-to-digital converter with up to 10 channels performing conversions

in a single-shot or scan modes, 6 synchronizable general-purpose timers and

supports an easy to use debugging serial interface (SWD).

All of the integrated features of STSPIN32F025x make design of the application PCB

easier, and result in reduced PCB area consumption, bill of material and overall

application cost.

STSPIN32F0251, STSPIN32F0252

DS13048 - Rev 4

page 2/32