MODEL: M1EAXV-2

M1EAXV-2 SPECIFICATIONS

ES-5995 Rev.2 Page 1/10

https://www.m-system.co.jp/

2 Channel Super-mini Signal Conditioners

with Display M1E-2 Series

DC ALARM

(2 channels, PC programmable, dual or quad alarm trip)

Functions & Features

• Provides relay outputs at preset DC input levels

• Quad or dual trip

• 2 Channels

• Front LCD display indicating values in scaled engineering

unit range is used to program the module

• Adjustable deadband (hysteresis)

• ON delay time selectable

• Hi/Lo trip and energized/de-energized coil independently

selectable for each setpoint

• Settable with front buttons

• Enclosed relays

• Relays can be powered by 200 V AC and 100 V DC

• High-density mounting on DIN rail

Typical Applications

• Annunciator

• Various alarm applications

36 (1.42)

99

(3.90)

125 (4.92)

mm (inch)

Note: The gure shows the combination

of the unit and the base.

MODEL: M1EAXV–2-[1]-R[2]

ORDERING INFORMATION

• Code number: M1EAXV-2-[1]-R[2]

Specify a code from below for each of [1] and [2].

(e.g. M1EAXV-2-2-R/Q)

• Specify the specification for option code /Q

(e.g. /C01/SET)

NO. OF CHANNELS

2: 2 channels

INPUT – Field-selectable

◆ DC Input

• Current input: 0 - 50 mA DC

• Voltage input: -1000 - +1000 mV DC

• Voltage input: -10 - +10 V DC

[1] OUTPUT

2: 4 points; N.O. or make contact

3: 4 points; N.C. or break contact

5: 2 points; SPDT or transfer contact

POWER INPUT

DC Power

R: 24 V DC

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

[2] OPTIONS

blank: none

/Q: With options (specify the specification)

SPECIFICATIONS OF OPTION: Q (multiple selections)

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

/C02: Polyurethane coating

/C03: Rubber coating

EX-FACTORY SETTING

/SET: Preset according to the Ordering Information Sheet

(No. ESU-5995)

RELATED PRODUCTS

• Installation base (model: M1E-BS2)

• M1EA configurator software (model: M1EACFG)

Downloadable at M-System’s web site.

A dedicated cable is required to connect the module to the

PC. Please refer to the internet software download site or

the users manual (EM-5994) for the M1EA configurator for

applicable cable types.

GENERAL SPECIFICATIONS

Construction: Plug-in

Connection

• Connected to base with connector

• Base

M2.6 screw terminals (torque: 0.5 N·m)

Applicable solderless terminal size (M3)

Screw terminal: Nickel-plated steel