MODEL: R3-GC1

R3-GC1 SPECIFICATIONS

ES-8462 Rev.7 Page 2/6

https://www.m-system.co.jp/

When driving an inductive load, external contact protection

and noise quenching recommended.

CC-Link COMMUNICATION

CC-Link: Both Version 1.10 and Version 2.00 are available.

Select the version with DIP SW3.

Cyclic expansion: 2, 4, 8 folds (Function selected with DIP

SW)

Station No. setting: Rotary switch; 1 – 64

Baud rate setting: Rotary switch

156kbps, 625kbps, 2.5Mbps, 5Mbps, 10Mbps

Station type: Remote device station

Required nodes: 4

Ver.1.10: (128 I/O points, 16 words)

Ver.2.00: (112 I/O points, 16 words) × m (m = expanded

cyclic setting)

Transmission cable: Approved for CC-Link

INSTALLATION

Operating temperature: -10 to +55°C (14 to 131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Atmosphere: No corrosive gas or heavy dust

Mounting: Installation Base (model: R3-BSx)

Weight: 200 g (0.44 lb)

PERFORMANCE

Data allocation

Ver.1.10: 16

Ver.2.00: 16 × m (m = expanded cyclic setting)

Current consumption: 120 mA

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 1500 V AC @ 1 minute

(CC-Link to internal bus or internal power to RUN contact

output)

2000 V AC @ 1 minute (power input to FG; isolated on the

power supply module)

STANDARDS & APPROVALS

EU conformity:

EMC Directive

EMI EN 61000-6-4

EMS EN 61000-6-2

RoHS Directive