MODEL: R3-NML3

R3-NML3 SPECIFICATIONS

ES-8336 Rev.6 Page 4/5

https://www.m-system.co.jp/

■ ANALOG DATA (16-bit data, models: R3-CT4A, CT4B, etc.)

0

15

16-bit binary data.

Integer obtained by multiplying unit value (A) by 100.

In case of CLSE-R5, integer obtained by multiplying unit value (A) by 1000.

■ ACCUMULATED COUNT DATA (32-bit data, models: R3-PA2, PA4A, WT1, WT4, etc.)

32-bit binary data is used for accumulated counts and encoder positions.

Lower 16 bits are allocated from the lowest address to higher ones, higher 16 bits in turn.

0

15

+0

Lower 16 bits

0

15

+1

Higher 16 bits

■ BCD DATA (32-bit data, models: R3-BA32A, BC32A, etc.)

32-bit binary data is used for BCD.

Lower 16 bits are allocated from the lowest address to higher ones, higher 16 bits in turn.

0

15

+0

Lower 16 bits

0

15

+1

Higher 16 bits

■ 16-POINT DISCRETE DATA (models: R3-DA16, DC16, etc.)

0

15

Input 1 (Output 1)

Input 2 (Output 2)

Input 3 (Output 3)

:

:

Input 16 (Output 16)

0 : OFF

1 : ON

EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm [inch]

1

2

3

4

5

6

27.5 [1.08]

109 [4.29]

POSITIONING

GUIDE

TERMINAL

COVER

6-M3

SCREW