MODEL: R3-NML3

R3-NML3 SPECIFICATIONS

ES-8336 Rev.6 Page 2/5

https://www.m-system.co.jp/

Max. number of slaves: 62

(The maximum number of slaves might change depending

on the master unit. Refer to the manual of the master unit)

Input output data length: 16/32/48/64 byte (Function

selected with DIP SW on side panel)

12(16 byte setting)

28(32 byte setting)

44(48 byte setting)

60(64 byte setting)

Station address: 03H - EFH

(Function selected with Rotary SW)

Available communication mode:

Cyclic communication mode: For cyclic communication and

message communication

Event-driven communication mode: For Event-driven

communication

Other slaves monitoring: Not supported

LNK 1 LED: ON at normal communication

LNK 2 LED: ON at normal communication

INSTALLATION

Power consumption

•AC:

Approx. 25 VA at 100 V

Approx. 30 VA at 200 V

•DC: Approx. 15 W

Current consumption (no power supply): 110 mA

Output current (power supply): 250 mA continuous at 20 V

DC; 400 mA for 10 minutes

Operating temperature: -10 to +55°C (14 to 131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Atmosphere: No corrosive gas or heavy dust

Mounting: Installation Base (model: R3-BSx)

Weight: 200 g (0.44 lb)

PERFORMANCE

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 1000 V AC @ 1 minute (MECHATROLINK

to internal bus or internal power to power input to RUN

output to FG)

STANDARDS & APPROVALS

EU conformity:

EMC Directive

EMI EN 61000-6-4

EMS EN 61000-6-2

RoHS Directive