MODEL: R7G4HEIP-6-DA16

R7G4HEIP-6-DA16 SPECIFICATIONS

ES-8004-A Rev.0 Page 1/5

http://www.m-system.co.jp/

Remote I/O R7G4H Series

EtherNet/IP I/O MODULE

(NPN/PNP discrete input, 16 points, screw terminal block)

Functions & Features

• 16 points NPN/PNP discrete input module for EtherNet/IP

• Supports DLR (Device Level Ring) to form a ring topology

55 (2.17)

(mm)

55 (2.17)

130 (5.12)

MODEL: R7G4HEIP-6-DA16-R[1]

ORDERING INFORMATION

• Code number: R7G4HEIP-6-DA16-R[1]

Specify a code from below for [1].

(e.g. R7G4HEIP-6-DA16-R/Q)

• Specify the specification for option code /Q

(e.g. /C01)

TERMINAL BLOCK

6: Screw terminal block for power supply

RJ-45 Modular jack for communication

Screw terminal block for I/O

I/O TYPE

DA16: NPN/PNP discrete input, 16 points

POWER INPUT

DC power

R: 24 V DC

(Operational voltage range: ±10 %; ripple 10 %p-p max.)

[1] OPTIONS

blank: none

/Q: With options (specify the specification)

SPECIFICATIONS OF OPTION: Q

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

/C02: Polyurethane coating

/C03: Rubber coating

RELATED PRODUCTS

• PC configurator software (model: R7CFG)

• EDS file

The EDS files and configurator software are downloadable at

M-System’s web site.

For connecting to PC, use commercially available Mini-B

type USB cable. (provided by user)

GENERAL SPECIFICATIONS

Connection

EtherNet/IP: RJ-45 Moduler Jack

Power input, input: M3 separable screw terminal (torque 0.5

N·m)

Solderless terminal: Refer to the drawing at the end of the

section.

Recommended manufacturer: Japan Solderless Terminal

MFG.Co.Ltd, Nichifu Co.,ltd

Screw terminal: Nickel-plated steel

Housing material: Flame-resistant resin (gray)

Isolation: Input to EtherNet/IP or FE to power

Status indicator LED: PWR, RUN

(Refer to the instruction manual)

Discrete input status indicator LED: Green LED turns on with

input ON

Read rate: Selectable with R7CFG

■Recommended solderless terminal

3.3 (.13) max

mm (inch)

EtherNet/IP COMMUNICATION

Communication Standard: IEEE 802.3u

Transmission: 10BASE-T, 100BASE-TX

Baud rate: 10/100 Mbps (Auto Negotiation function)

Protocol: EtherNet/IP

Max. number of socket connections: 3

Connection type: Exclusive owner / Listen only / Input only

Transmission media: 10BASE-T (STP, Category 5), 100BASE-

TX (STP, Category 5e)

Network topology: Line, star and ring

Max. length of fieldbus segment: 100 meters

IP address: 192.168.0.250 (factory setting);

Only host address in IP address is configurable via rotary

switches, the other items via PC configurator software