MODEL: R7G4HEIP-6-DA16

R7G4HEIP-6-DA16 SPECIFICATIONS

ES-8004-A Rev.0 Page 2/5

http://www.m-system.co.jp/

(model: R7CFG).

DLR supported

Port No.: 2222, 44818

I/O data size: One (1) word

Status indicator LEDs: MS, NS (Refer to the instruction

manual for details)

INPUT SPECIFICATIONS

Common: Positive or negative common (NPN/PNP) per 16

points

Maximum inputs applicable at once: No limit (at 24 V DC)

Rated input voltage: 24 V DC ±10 %; ripple 5 %p-p max.

ON voltage / current: ≥ 15 V DC (input – COM) / ≥ 3.5 mA

OFF voltage / current: ≤ 5 V DC (input – COM) / ≤ 1 mA

Input current: ≤ 5.5 mA per point at 24 V DC

Input resistance: Approx. 4.4 kΩ

ON delay: ≤ 0.2 msec.

OFF delay: ≤ 0.5 msec.

INSTALLATION

Current consumption: Approx. 45 mA

Operating temperature: -10 to +55°C (14 to 131°F)

Storage temperature: -20 to +65°C (-4 to +149°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Atmosphere: No corrosive gas or heavy dust

Mounting: Surface or DIN rail (35 mm rail)

Weight: 200 g (0.44 lb)

PERFORMANCE

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 1500 V AC @ 1 minute

(input to EtherNet/IP or FE to power)

STANDARDS & APPROVALS

EU conformity:

EMC Directive

EMI EN 61000-6-4

EMS EN 61000-6-2

RoHS Directive

EN 50581

PC CONFIGURATOR

The following parameters can be set with using PC

Configurator Software (model: R7CFG)

Refer to the users manual for the R7CFG for detailed

operation of the software program.

■ CHANNEL BATCH SETTING

PARAMETER

SETTING RANGE

DEFAULT

SETTING

Conversion rate 1 ms, 5 ms, 10 ms, 20 ms,

50 ms, 70 ms, 100 ms,

200 ms

10 ms

■ EtherNet SETTING

PARAMETER

SETTING RANGE

DEFAULT

SETTING

IP Address

0.0.0.0 - 255.255.255.255

192.168.0.250

Subnet Mask

0.0.0.0 - 255.255.255.255

255.255.255.0

Default Gateway

0.0.0.0 - 255.255.255.255

192.168.0.1

Time Out

0.0 - 3276.7 (sec.)

3.0 (sec.)

Use IP Address

DHCP / CONFIG

CONFIG