R7HL-YV2-R datasheet(24/55 Pages) MSYSTEM

24 / 55 page

MODEL: R7HL

R7HL SPECIFICATIONS

ES-7812 Rev.18 Page 24/55

http://www.m-system.co.jp/

NPN DISCRETE INPUT &

PNP TRANSISTOR OUTPUT MODULE, 8 points each

MODEL: R7HL-DAC16B

SPECIFICATIONS

■ COMMON SPECIFICATIONS

Common: Positive common per 16 points

Number of I/O: Input, 8 points; Output, 8 points

Maximum I/O applicable at once: No limit (at 24 V DC)

I/O status indicator: LED turns ON with contact ON

Isolation: Input or output to HLS to power input to FG

Data allocation: 1

■ INPUT

Rated input voltage: 24 V DC ±10 %; ripple 5 %p-p max.

ON voltage/current: ≥ 15 V DC (input-COM) / ≥ 3.5 mA

OFF voltage/current: ≤ 5 V DC (input-COM) / ≤ 1 mA

Input current: ≤ 5.5 mA per point at 24 V DC

Input resistance: Approx. 4.4 kΩ

ON delay: ≤ 0.5 msec.

OFF delay: ≤ 0.5 msec.

■ OUTPUT

Rated load voltage: 24 V DC ±10 %

Rated output current: 0.25 A per point, 2.0 A per common

Residual voltage: ≤ 1.2 V

Leakage current: ≤ 0.1 mA

ON delay: ≤ 0.2 msec.

OFF delay: ≤ 0.5 msec.

(When driving an inductive load, connect a diode in parallel

with the load.)

OPERATING MODE SETTING

(*) Factory setting

Caution ! - SW1-1 through 1-6 are unused. Be sure to turn

off unused ones.

• Output at the Loss of Communication (SW1-7)

SW1-7

Output at the loss of communication

OFF

Hold the output (*)

(maintains the last data received normally)

Reset the output (turned off)

• Transfer Rate (SW1-8)

SW1-8

Transfer rate

OFF

12Mbps (*)

6Mpbs

TERMINAL ASSIGNMENTS

＋24V

COM

NO.

FUNCTION

NO.

FUNCTION

COM

Common

+24V

24V DC

Input 0

Input 1

Input 2

Input 3

Input 4

Input 5

Input 6

Input 7

Output 0

Output 1

Output 2

Output 3

Output 4

Output 5

Output 6

Output 7

R7HL-YV2-R 数据表(PDF) 24 Page - M-System Co.,Ltd.

R7HL-YV2-R 数据表(HTML) 24 Page - M-System Co.,Ltd.

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55

数据表下载