| 数据搜索系统,热门电子元器件搜索 |
|
SC3200 数据表(PDF) 21 Page - Advanced Micro Devices |
|
|
|||||||||||||||||||||||||||||
SC3200 数据表(HTML) 21 Page - Advanced Micro Devices |
|
21 / 447 page ![]() AMD Geode™ SC3200 Processor Data Book 21 Architecture Overview Revision 5.1 11 RSVD (Reserved). Write as 0. 10:8 RRD (ACT(0) to ACT(1) Command Period, tRRD). Minimum number of SDRAM clocks between ACT and ACT command to two different component banks within the same module bank. The memory controller does not perform back-to-back Acti- vate commands to two different component banks without a READ or WRITE command between them. Hence, this field should be written as 001. 7 RSVD (Reserved). Write as 0. 6:4 DPL (Data-in to PRE command period, tDPL). Minimum number of SDRAM clocks from the time the last write datum is sampled till the bank is precharged: 000: Reserved 010: 2 CLK 100: 4 CLK 110: 6 CLK 001: 1 CLK 011: 3 CLK 101: 5 CLK 111: 7 CLK 3:0 RSVD (Reserved). Leave unchanged. Always returns a 101h. Note: Refer to the SDRAM manufacturer’s specification for more information on component banks. GX_BASE+8414h-8417h MC_GBASE_ADD (R/W) Reset Value: 00000000h 31:18 RSVD (Reserved). Write as 0. 17 TE (Test Enable TEST[3:0]). 0: TEST[3:0] are driven low (normal operation). 1: TEST[3:0] pins are used to output test information 16 TECTL (Test Enable Shared Control Pins). 0: RASB#, CASB#, CKEB, WEB# (normal operation). 1: RASB#, CASB#, CKEB, WEB# are used to output test information 15:12 SEL (Select). This field is used for debug purposes only and should be left at zero for normal operation. 11 RSVD (Reserved). Write as 0. 10:0 GBADD (Graphics Base Address). This field indicates the graphics memory base address, which is programmable on 512 KB boundaries. This field corresponds to address bits [29:19]. Note that BC_DRAM_TOP must be set to a value lower than the Graphics Base Address. GX_BASE+8418h-841Bh MC_DR_ADD (R/W) Reset Value: 00000000h 31:10 RSVD (Reserved). Write as 0. 9:0 DRADD (Dirty RAM Address). This field is the address index that is used to access the Dirty RAM with the MC_DR_ACC register. This field does not auto increment. GX_BASE+841Ch-841Fh MC_DR_ACC (R/W) Reset Value: 0000000xh 31:2 RSVD (Reserved). Write as 0. 1 D (Dirty Bit). This bit is read/write accessible. 0 V (Valid Bit). This bit is read/write accessible. Table 2-2. SC3200 Memory Controller Registers (Continued) Bit Description |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |