MODEL: R8-NEIP1

R8-NEIP1 SPECIFICATIONS

ES-9799 Rev.0 Page 1/5

http://www.m-system.co.jp/

Remote I/O R8 Series

POWER/NETWORK MODULE

(EtherNet/IP)

Functions & Features

• Free combination of analog and discrete I/O

• Space-saving

Typical Applications

• Remote I/O for DCS and PLC

MODEL: R8–NEIP1–R[1]

ORDERING INFORMATION

• Code number: R8-NEIP1-R[1]

Specify a code from below for [1].

(e.g. R8-NEIP1-R/Q)

• Specify the specification for option code /Q

(e.g. /C01)

MODULE TYPE

NEIP1: EtherNet/IP

POWER INPUT

DC power

R: 24 V DC

(Operational voltage range: ±10 %; ripple 10 %p-p max.)

[1] OPTIONS

blank: none

/Q: With options (specify the specification)

SPECIFICATIONS OF OPTION: Q

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

/C02: Polyurethane coating

RELATED PRODUCTS

• PC Configurator cable (model: COP-US)

• PC configurator software (model: R8CFG)

• EDS file

The EDS file and configurator software are downloadable at

M-System’s web site.

PACKAGE INCLUDES...

• Protective cover

GENERAL SPECIFICATIONS

Connection

• Power input or excitation supply: Tension clamp (Front

Twin connection)

Stripped length: 10 mm

• EtherNet/IP: RJ-45 modular jack

• Internal bus or internal power or excitation supply: Via

internal bus connector

Max. number of I/O modules: 16

(Max. consumption current of I/O modules: 1.6 A)

Isolation: EtherNet/IP to internal bus or internal power or

power input to excitation supply to FE1

Status indicators: Power, RUN, MS, NS, LNK1, LNK2

Data allocation: Mode 1, 2

EtherNet/IP COMMUNICATION

Communication Standard: IEEE 802.3u

Transmission: 10BASE-T, 100BASE-TX

Baud rate: 10/100 Mbps (Auto Negotiation function)

Protocol: EtherNet/IP

Connection type: Exclusive owner / Listen only / Input only

Max. number of socket connections: 3

Transmission media: 10BASE-T (STP, Category 5), 100BASE-

TX (STP, Category 5e)

Network topology: Line, star and ring

Max. length of fieldbus segment: 100 meters

IP address: 192.168.0.250 (factory setting);

Only host address in IP address is configurable via rotary

switches, the other items via PC configurator software

(model: R8CFG).

DLR supported

Port No.: 2222, 44818

I/O data size: 40 - 140 byte (configurable with DIP SW)

Status indicator LEDs: MS, NS (Refer to the instruction

manual for details)

INSTALLATION

Power consumption

•DC: Approx. 12 W 24 V DC (@ internal power max. current