MODEL: SHSP

SHSP SPECIFICATIONS

ES-9308 Rev.8 Page 1/5

http://www.m-system.co.jp/

8-PORT ETHERNET SWITCH

(with surge protector)

Functions & Features

• Surge protector function for each port

• Protects Ethernet devices from surges entering through

LAN cables

• Surge protector life monitor function with LED and contact

output alarm

• Data transfer rate can be fixed

Typical Applications

• Risk managed system

138

(5.43)

124

(4.88)

40 (1.57)

mm (inch)

MODEL: SHSP–1–[1][2]

ORDERING INFORMATION

• Code number: SHSP-1-[1][2]

Specify a code from below for each of [1] and [2].

(e.g. SHSP-1-R/CE/Q)

• Specify the specification for option code /Q

(e.g. /C01/SET)

SURGE PROTECTOR

1: With

[1] POWER INPUT

AC Power

M2: 100 – 240V AC (Operational voltage range 85 – 264 V,

47 – 66 Hz)

(Select ‘/N’ for ‘Standards & Approvals’ code.)

DC Power

R: 24 V DC

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

(Select ‘/CE’ for ‘Standards & Approvals’ code.)

[2] OPTIONS (multiple selections)

Standards & Approvals (must be specified)

/N: Without CE

/CE: CE marking

Other Options

blank: none

/Q: Option other than the above (specify the specification)

SPECIFICATIONS OF OPTION: Q (multiple selections)

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

/C02: Polyurethane coating

/C03: Rubber coating

EX-FACTORY SETTING

/SET: Preset according to the Ordering Information Sheet

(No. ESU-9308)

RELATED PRODUCTS

• PC configurator software (model: SHSPCFG)

Downloadable at M-System’s web site.

A dedicated cable is required to connect the module to the

PC. Please refer to the internet software download site or

the users manual for the PC configurator for applicable

cable types.

GENERAL SPECIFICATIONS

Surge protection: All ports

Connection

Ethernet: RJ-45 connector

Power input, grounding, alarm contact output:

M3 separable screw terminal (torque 0.8 N·m)

PC configurator: Miniature jack

Screw terminal: Nickel-plated steel

Housing material: Steel, melamine baking finish (black)

Monitor LED

Status: Green/Red bicolor LED;

Green light turns on in normal conditions;

Red turns on in an abnormality.

(Amber light turns on for approx. 1 second while the

internal processor is initialized at the startup.)

Surge Protector: Green/Amber/Red tricolor LED indicating

the surge protector life.

OFF while no surge has been detected;

Green when the first surge has been detected;

Amber when the protector is close to the end of life;

Red at the end of life.

(Amber light turns on for approx. 1 second while the

internal processor is initialized at the startup.)

LINK LED: Green LED indicating port link status.

ON with a link established; Flashes during communication.

100M LED: Amber LED indicating data transfer rate;

ON at 100 Mbps;

OFF at 10 Mbps.

PC configuration: PC Confiugrator Software is used to

program;