MODEL: TR30

TR30 SPECIFICATIONS

ES-8631 Rev.16 Page 1/8

http://www.m-system.co.jp/

Paperless Recorder TR30 Series

PAPERLESS RECORDER

Functions & Features

• Records measurement data and running / stopping status

of device in an SD card

• Allows Web browsing of the recorded data

• Flexibly combined with R30 series I/O modules depending

on required signal type and the number of points

110

(4.33)

50

(1.97)

98

(3.86)

mm (inch)

MODEL: TR30-G-R[1]

ORDERING INFORMATION

• Code number: TR30-G-R[1]

Specify a code from below for [1].

(e.g. TR30-G-R/Q)

• Specify the specification for option code /Q

(e.g. /C01)

MODULE TYPE

G: High functionality

POWER INPUT

DC power

R: 24 V DC

(Operational voltage range: ±10 %; ripple 10 %p-p max.)

[1] OPTIONS

blank: none

/Q: With options (specify the specification)

SPECIFICATIONS OF OPTION: Q

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

/C02: Polyurethane coating

/C03: Rubber coating

FUNCTIONS & FEATURES

TR30 is used in combination with base (model: R30BS) and

I/O modules (Remote I/O R30 series).

■ TR30

Input data cllection and recording, and output data

transmission:

Collects data from I/O modules via internal bus and records

the data in the internal memory, then in SD card;

Connects with remote I/Os using Modbus/TCP via Ethernet,

and collects and records input data of the remote I/Os;

Connects with Mitsubishi programmable controller MELSEC

using SLMP to collect and record data of the CPU of MELSEC;

and

Transmits alarm output to Output module in accordance

with the preset alarm level.

• Web server:

Works as a web server and displays collected data on the

browser of a tablet. Various settings and operations can be

done from the tablet.

• Internal power

Internal power required for TR30 and I/O modules is

generated from supplied power.

■ I/O Module

Outputs data received through the internal bus as discrete

outputs; and outputs discrete input data and A/D converted

analog input values to the internal bus. (Refer to the

specification of each R30 I/O module for details)

■ Installation base

The base for installation of modules incorporates PWB for

internal power and internal bus. (Refer to the specification

of installation base (model: R30BS))

RELATED PRODUCTS

• Remote I/O R30 series

• PC Configurator cable

USB 2.0 compatible cable

(TR30 connector: mini-B type, 5.0m max.)

• PC configurator software (model: TRGCFG)

• PC configurator software (model: R30CFG)

• Viewer software (model: TRViewer)

Software downloadable at M-System’s web site.

• SD card

An SD card is required to store data in the unit.

Use a memory card of the specified model number.

Consult M-System for purchase.

- Hagiwara Solutions NSD6-004GH(B21SEI,

NSD6-016GH(B20SEI

(NSD6-004GH(A00SDI ... discontinued)