MODEL: TR30

TR30 SPECIFICATIONS

ES-8631 Rev.16 Page 2/8

http://www.m-system.co.jp/

GENERAL SPECIFICATIONS

Connection

RUN contact output, power supply: M3 separable screw

terminal (torque 0.5 N·m)

Ethernet: RJ-45 modular jack

Internal bus: Via the Installation Base (model: R30BS)

Internal power: Via the Installation Base (model: R30BS)

Solderless terminal: Refer to the drawing at the end of the

section.

Recommended manufacturer: Japan Solderless Terminal

MFG. Co., Ltd., Nichifu Co., Ltd.

(Solderless terminals with insulation sleeve do not fit.)

Screw terminal: Nickel-plated steel

Housing material: Flame-resistant resin (gray)

Max. number of R30 I/O modules: 16

(Max. consumption current of I/O modules: 500 mA)

Isolation: Ethernet to internal bus or internal power to RUN

contact output to power supply to FE

Calendar clock: Year (4 digits), month, date, day, hour,

minute, second

Read rate: Approx. ≤ 1 msec. (Connected max. modules)

Indicator LEDs: PWR, TR30 RUN, RECORD, SD CARD, ERROR

(Refer to the insruction manual)

■ RUN CONTACT OUTPUT

RUN contact output: Turns on (closed) at normal operation

Rated load: 250 V AC @ 0.5 A (cos ø = 1)

30 V DC @ 0.5 A (resistive load)

(Less than 50 V AC to conform with EU Directive)

Maximum switching voltage: 250 V AC or 30 V DC

Maximum switching power: 250 VA (AC) or 30 W (DC)

Minimum load: 5 V DC @ 10 mA

driving an inductive load, external contact protection and

noise quenching recommended.

■Recommended solderless terminal size - M3 (unit: mm)

12 max.

3 max.

3.2 dia.

R30 CONNECTION

■ TR30 INSTALL POSITION

Install to PWR slot (most left slot) and COM slot (right next

to PWR slot).

■ COMPATIBLE R30 SERIES MODULES

TYPE

MODEL

Base

R30BS

Discrete input

R30XN16A

Discrete output

R30YN16A, R30YN16C

DC voltage/current input

R30SV2, R30SV4

DC voltage/current input, high speed R30SVF4

Thermocouple input

R30TS4

RTD input

R30RS4

Potentiometer input

R30MS4

AC current input

R30CT4E

Universal input

R30US2, R30US4

Totalized pulse input

R30PA2

Blank filler

R30DM

ETHERNET COMMUNICATION

Communication Standard: IEEE 802.3u

Transmission: 10BASE-T, 100BASE-TX

Baud rate: 10/100 Mbps (Auto Negotiation function)

Protocol: TCP/IP, Modbus/TCP, HTTP, SLMP, FTP, SMTP, SNTP

Transmission media: 10BASE-T (STP, Category 5) 100BASE-

TX (STP, Category 5e)

Max. length of fieldbus segment: 100 meters

Ethernet indicator LED: DPX, LNK

IP address: 192.168.0.1 (factory setting)

INSTALLATION

Power consumption

•DC: Approx. 18 W 24 V DC (@ output current max. 500

mA)

Internal power

• Max. rated output voltage / current: 21 V DC / 500 mA

Total current consumed at the R30 I/O modules used

combination with TR30 must be within above current.

Operating temperature: 0 to 50°C (32 to 122°F)

Storage temperature: -10 to +60°C (14 to 140°F)

Operating humidity: 10 to 90 %RH (non-condensing)

Atmosphere: No corrosive gas or heavy dust

Mounting: Installation Base (model: R30BS)

Weight: 300 g (0.66 lb)