Multiplier and Zero Delay Buffer

MDS 2402 D

3

Revision 122104

Integrated Circuit Systems, Inc.

ICS2402

External Components

The ICS2402 requires a 0.01µF decoupling capacitor to be connected between VDD and GND. It must be

connected close to the part to minimize lead inductance. No external power supply filtering is required for

this device. A 33

Ω series terminating resistor can be used next to each output pin.

Absolute Maximum Ratings

Stresses above the ratings listed below can cause permanent damage to the ICS2402. These ratings,

which are standard values for ICS commercially rated parts, are stress ratings only. Functional operation of

the device at these or any other conditions above those indicated in the operational sections of the

specifications is not implied. Exposure to absolute maximum rating conditions for extended periods can

affect product reliability. Electrical parameters are guaranteed only over the recommended operating

temperature range.

Recommended Operation Conditions

Item

Rating

Supply Voltage, VDD

7 V

All Inputs and Outputs

-0.5 V to VDD+0.5 V

Ambient Temperature under Bias

-55 to 125

°C

Storage Temperature

-65 to +150

°C

Junction Temperature

125

°C

Power Dissipation

0.5 W

Parameter

Min.

Typ.

Max.

Units

Ambient Operating Temperature

0

+70

°C

Power Supply Voltage (measured in respect to GND)

+4.5

+5.0

+5.5

V

Power Supply Voltage (measured in respect to GND)

+3.15

+3.3

+3.45

V