E5CC-800

6

Characteristics

*1 The indication accuracy of K thermocouples in the -200 to 1300°C range, T and N thermocouples at a temperature of -100°C max., and U and

L thermocouples at any temperatures is

±2°C ±1 digit max. The indication accuracy of the B thermocouple at a temperature of 400°Cmax. is

not specified. The indication accuracy of B thermocouples in the 400 to 800°Crange is

±3°C max. The indication accuracy of the R and S

thermocouples at a temperature of 200°C max. is

±3°C ±1 digit max. The indication accuracy of W thermocouples is ±0.3 of PV or ±3°C,

whichever is greater,

±1 digit max. The indication accuracy of PL II thermocouples is ±0.3 of PV or ±2°C, whichever is greater, ±1 digit max.

*2 Ambient temperature: -10°C to 23°C to 55°C, Voltage range: -15% to 10% of rated voltage

*3 K thermocouple at -100°C max.:

±10°C max.

*4 “EU” stands for Engineering Unit and is used as the unit after scaling. For a temperature sensor, the EU is °C or °F.

*5 The unit is determined by the setting of the Integral/Derivative Time Unit parameter.

*6 Refer to information on maritime standards in Shipping Standards on page 31 for compliance with Lloyd's Standards.

Indication accuracy

(at the ambient temperature of 23°C)

Thermocouple:

(

±0.3% of indicated value or ±1°C, whichever is greater) ±1 digit max. *1

Platinum resistance thermometer: (

±0.2% of indicated value or ±0.8°C, whichever is greater) ±1 digit

Analog input:

±0.2% FS ±1 digit max.

CT input:

±5% FS ±1 digit max.

Influence of temperature *2

Thermocouple input (R, S, B, W, PL II): (

±1% of PV or ±10°C, whichever is greater) ±1 digit max.

Other thermocouple input: (

±1% of PV or ±4°C, whichever is greater) ±1 digit max. *3

Platinum resistance thermometer: (

±1% of PV or ±2°C, whichever is greater) ±1 digit max.

Analog input: (

±1%FS) ±1 digit max.

CT input: (

±5%FS) ±1 digit max.

Influence of voltage *2

Input sampling period

50 ms

Hysteresis

Temperature input: 0.1 to 999.9°C or °F (in units of 0.1°C or °F) *4

Analog input: 0.01% to 99.99% FS (in units of 0.01% FS)

Proportional band (P)

Temperature input: 0.1 to 999.9°C or °F (in units of 0.1°C or °F) *4

Analog input: 0.1% to 999.9% FS (in units of 0.1% FS)

Integral time (I)

0 to 9999 s (in units of 1 s), 0.0 to 999.9 s (in units of 0.1 s) *5

Derivative time (D)

0 to 9999 s (in units of 1 s), 0.0 to 999.9 s (in units of 0.1 s) *5

Proportional band (P) for cooling

Temperature input: 0.1 to 999.9°C or °F (in units of 0.1°C or °F) *4

Analog input: 0.1% to 999.9% FS (in units of 0.1% FS)

Integral time (I) for cooling

0 to 9999 s (in units of 1 s), 0.0 to 999.9 s (in units of 0.1 s) *5

Derivative time (D) for cooling

0 to 9999 s (in units of 1 s), 0.0 to 999.9 s (in units of 0.1 s) *5

Control period

0.1, 0.2, 0.5, 1 to 99 s (in units of 1 s)

Manual reset value

0.0 to 100.0% (in units of 0.1%)

Alarm setting range

-1999 to 9999 (decimal point position depends on input type)

Affect of signal source resistance

Thermocouple: 0.1°C/

Ω max. (100 Ωmax.)

Platinum resistance thermometer: 0.1°C/

Ω max. (10 Ω max.)

Insulation resistance

20 M

Ω min. (at 500 VDC)

Dielectric strength

2,300 VAC, 50 or 60 Hz for 1 min (between terminals with different charge)

Vibration

resistance

Malfunction

Destruction

Shock resistance

Malfunction

Weight

Controller: Approx. 120 g, Mounting Bracket: Approx. 10 g

Degree of protection

Front panel: IP66, Rear case: IP20, Terminals: IP00

Memory protection

Non-volatile memory (number of writes: 1,000,000 times)

Standards

Approved standards

UL 61010-1, CSA C22.2 No. 611010-1 (evaluated by UL)

Conformed standards

EN 61010-1 (IEC 61010-1): Pollution level 2, overcurrent category II, Lloyd's standards *6

EMC

EMI:

EN61326

Radiated Interference Electromagnetic Field Strength: EN 55011 Group 1, class A

Noise Terminal Voltage:

EN 55011 Group 1, class A

EMS:

EN 61326

ESD Immunity:

EN 61000-4-2

Electromagnetic Field Immunity:

EN 61000-4-3

Burst Noise Immunity:

EN 61000-4-4

Conducted Disturbance Immunity:

EN 61000-4-6

Surge Immunity:

EN 61000-4-5

Voltage Dip/Interrupting Immunity:

EN 61000-4-11