E5CC-RX2DSM-800 datasheet(32/36 Pages) OMRON

32 / 36 page

E5CC/E5EC-800

Mounting the Terminal Cover

E5CC

Slightly bend the E53-COV23 Terminal Cover to attach it to the

terminal block as shown in the following diagram. The Terminal Cover

cannot be attached in the opposite direction. E53-COV17 Terminal

Cover can be also attached.

Make sure that the "UP" mark is facing up, and then attach the E53-

COV17 Terminal Cover to the holes on the top and bottom of the

Digital Temperature Controller.

E5EC

Slightly bend the E53-COV24 Terminal Cover to attach it to the

terminal block as shown in the following diagram. The Terminal Cover

cannot be attached in the opposite direction.

●Precautions when Wiring

• Separate input leads and power lines in order to prevent external

noise.

• Use a shielded, AWG24 to AWG18 (cross-sectional area of 0.205

to 0.8231 mm2) twisted-pair cable.

• Use crimp terminals when wiring the terminals.

• Use the suitable wiring material and crimp tools for crimp terminals.

• Tighten the terminal screws to a torque of 0.43 to 0.58 N•m.

• Use the following types of crimp terminals for M3 screws.

Adapter

Terminal Cover

(E53-COV17)

(Sold separately)

E53-COV17

E53-COV23

Enlarged illustration of

Terminal Section

Enlarged illustration of

Slightly bend the

E53-COV24 Terminal

Cover in the direction

shown by the arrows to

attach it to the terminal block.

5.8 mm max.

E5CC-RX2DSM-800 数据表(PDF) 32 Page - Omron Electronics LLC

E5CC-RX2DSM-800 数据表(HTML) 32 Page - Omron Electronics LLC

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36

数据表下载