–

–

–

–

18

19

19. The Submit button writes all changes to the active module.

20. The Set Defaults button restores the active module to factory default

conditions.

The Command Set tab (Figure 17) allows specific commands to be written

to the module.

1. The Command box shows the hexadecimal values that are written to

the module. Values can be typed into the box or a command can be

selected from the Commands menu.

2. The Response box shows the hexadecimal values that are returned

from the module in response to a command.

3. The Commands drop-down menu shows all of the commands that

are available for the active module (Figure 18). Selecting one of the

commands from this menu automatically fills in the Command box. The

values can be adjusted by typing in the box.

4

1

2

3

6

5

Figure 17: The Master Development System Software Command Set Tab

4. The Items drop down menu displays all of the items that are available

for the active module (Figure 19). Selecting one of the items from

this menu automatically fills in the Command box. The values can be

adjusted by typing in the box.

5. Clicking the Send button writes the values in the Command box to the

module.

6. The structure of the selected command and its response is shown

in the main window. Please see the HumRC™ Series Transceiver

Command Data Interface Reference Guide for definitions of each value.

Figure 19: The Master Development System Software Demo Command Set Tab Items Menu

Figure 18: The Master Development System Software Demo Command Set Tab Commands Menu